User's Manual

2
PREPARATION
BEFORE USE
1. Verify that the product and the application are compatible, if in doubt call Customer Support @ (888)-332-6419.
2. Before using this product, read the owner’s manual completely and familiarize yourself thoroughly with the product,
its components and recognize the hazards associated with its use.
3. Replace worn or damaged parts and assemblies with Authorized Replacement Parts only. (See Replacement
Parts Section).
SAFETY and GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
portable air tank before using. The owner and operator of this equipment shall have an understanding of this portable
air tank and safe operating procedures before attempting to use. The owner and operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be
conveyed in the operator's native language before use of this product is authorized. If any doubt exists as to the
safe and proper use of this portable air tank, remove from service immediately.
Inspect before each use. Do not use if broken, bent, cracked or damaged parts are noted. (Including warning label).
Any portable air tank that appears damaged in any way, is missing parts, or operates abnormally shall be removed
PRODUCT DESCRIPTION
ATD Tools Portable Air Tanks are designed to contain air pressure up to 125 psi. These portable air tanks are
.
!
The air contained within this tank can not be made breathable! NEVER rely on this portable air tank as a
source of breathable air.
Figure 1 - Typical Air Tank Nomenclature
Reservoir
Air Chuck
Air Pressure Gauge
Air Inlet
Manifold
Air Valve Knob
Air Hose
from service immediately. If the portable air tank has been dropped, impacted suddenly, or dented, immediately
discontinue use until product has been checked by an authorized service center (contact distributor or manufacturer
for a list of authorized service centers). It is recommended that an annual inspection be done by qualified personnel.
Labels and operator’s manuals are availalbe from the manufacturer.
!
This portable air tank should only be used for the intended use of portable air. Never use past the discard
date on the bottom of the tank. This tank is NOT designed to meet the requirements of ASME or OSHA
1915.172. Check your state and municipal regulatory requirements before using.