ATD‐30002 Blower Heater Attachment Instruction Manual Save this manual for future reference
IMPORTANT INSTRUCTIONS & WARNINGS When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to person, including the following: 1) Read all instructions before using this heater. THIS HEATER IS DESIGNED FOR USE WITH THE ATD FAN BLOWER UNIT MODEL ATD‐30001 ONLY. 2) This heater attachment is NOT designed to be used as a space heater, and is not designed for hours of prolonged use.
OPERATION INSTRUCTIONS Heater Attachment: Only attach heater to an ATD Fan Blower unit model ATD‐30001. Slide the heater over the blower outlet and secure the spring clip to the blower catch.(See Figure 1). The fit should be tight with no gaps. To Operate: Plug the heater power cord into the blower receptacle. TURN THE BLOWER ON FIRST and then turn on the heater with the lighted “On‐ Off” switch. When the switch is lit, the power is applied to the heater.
