ATD‐5403 Ford Triton Spark Plug Porcelain Extractor Instructions
THESE INSTRUCTIONS INVOLVE THE FOLLOWING MODELS: ALL 3 VALVE TRITON ENGINES, 2004 TO PRESENT CAUTION: DO NOT REMOVE PLUGS WHEN THE ENGINE IS EXTREMELY HOT OR COLD. CAUTION: BE SURE TO ALWAYS WEAR SAFETY GLASSES. Some of the above mentioned engines may experience difficulty with spark plug removal which may cause damage to the spark plug and leave part of the spark plug in the cylinder head. Mode 1: The ground electrode shield is left behind as an empty shell.
Porcelain Removal: Bonding process NOTE: DO NOT ALLOW LOCTITE TO CONTACT THREADS IN CYLINDER HEAD. 1. Working time limit of Loctite 680 is 10 minutes. 2. Apply Loctite to the applicator approximately 3/4 inch long. Do not apply excessive amount of Loctite to drip off the applicator. See Figure 3. 3. Insert the applicator into the porcelain and move up and down approximately 1/2~ inch. Twist the applicator to completely cover the inside of the porcelain. 4.