User's Manual

ATD-5830

3/16” AIR RIVETER INSTRUCTION MANUAL

Safety Precautions

• Do not use the tool outside of the design intent.

• Never modify the tool for any other purpose, or for its use.

• Normal use of this product is likely to expose the user to dust and /or microscopic

particles containing chemicals known to the State of California to cause cancer, birth

defects or other reproductive harm. Always wear appropriate safety equipment and

clothing when using this product. Study, understand and follow all instructions

provided with this product.

• Always wear ANSI approved goggles when using this product.

• Always select the correct accessories of the correct size and design for the job that

you are attempting to perform.

• Always work in a clean, safe, well-lit, organized and adequately equipped area.

• Do not begin repairs without assurance that vehicle is in secure position and will not

move during repair.

Important:

Read these instructions carefully before installing, operating, servicing or repairing this tool.

Keep these instructions in a safe accessible place.

Unpacking:

When unpacking this unit, check the parts diagram and part number listing to make sure all

parts are included. If any parts are missing or damaged please call your distributor.

Product Information:

• Powerful durable, high speed production tool

• Quick release air valve permits cylinder to return quickly for high speed assembly

operations: Prevents overloading for long life.

• Performs well at any angle

• Gets into hard-to-reach areas

• Provides quick, quiet and comfortable operation preventing user fatigue

• Includes 3/16”(4.8mm), 5/32”(4mm), 1/8”(3.2mm) & 3/32”(2.4mm) nosepieces

PAGE 1
ATD-5830 3/16” AIR RIVETER INSTRUCTION MANUAL Safety Precautions • • • • • • • Do not use the tool outside of the design intent. Never modify the tool for any other purpose, or for its use. Normal use of this product is likely to expose the user to dust and /or microscopic particles containing chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Always wear appropriate safety equipment and clothing when using this product.
PAGE 2
Specifications: Rivet Capacity: 3/16” Overall Length: 10-5/8”(270mm) Net Weight: 3lbs(1.41kg) Stroke: 1/2”(14mm) Motor: 1/2hp Air Inlet Thread NPT: 1/4” Air Hose I.D. Size: 3/8”(10mm) Avg. Air Consumption: 4cfm Air Pressure: 90-120psi Maintenance/Adding Oil for Hydraulic Riveter 1. 2. 3. 4. 5. 6. 7. 8. Turn off air supply Use spanner wrench to dismantle the riveter head (fig. 1). Use spanner wrench to open bottom cover of the riveter (fig. 2). Remove piston from cylinder (fig. 3).
PAGE 3
PAGE 4