Hydraulic Transmission Jacks Operating Instructions & Parts Manual Model Number Atd-7435 Atd-7436 Atd-7437 Capacity 1100 Lb. 2000 Lb. 3000 Lb. Model Atd-7435 Model Atd-7436 Model Atd-7437 Atd Tools Inc.
Save these instructions For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is authorized.
Saddle Oil Filler Plug (not shown) Handle Sleeve ASSEMBLY Release Valve Knob Chain Little or no assembly is required. Refer to Figures in the manual for details in understanding the assembly and the components of your product. OPERATION Raise saddle: 1. Locate and close release valve by turning knob clockwise firmly, then pump the pump handle until the load is contacted. 2. Follow vehicle manufacturers recommended procedures for removing the load as outlined in vehicle service manual or repair guide.
MAINTENANCE Important: Use only a good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. We recommend Mobil DTE 13M or equivalent.
Replacement Parts for Model Atd-7435 Item 1 2 3 4 5 6 7 8 9 10 11 - Part# 505-9-0092-207 450-1-100-108 451-6-6200-108 450-3-5000-100 450-4-5300-108 450-3-5700-108 450-3-5600-205 G89-0-9003-7002 450-6-4409-107 G52-3-9903-104 450-4-1700-104 450-3-9901-107 Atd7435-L0 Atd7435-M0 5 Description Oil Filler Plug Hydraulic Unit Chain Saddle Assembly Angle Bar Tilt Screw Saddle Holder Caster Assembly Hydraulic Unit Pivot Pin Handle Release Valve Assembly Repair Kit for Hydraulic Unit Product Label Manual Qty 1 1
Replacement Parts for Model Atd-7436 Part# 505-9-0092-207 G52-1-1000-100 G36-6-7000-102 G52-3-4204-103 G52-6-4207-107 G52-6-4402-105 G52-6-4401-103 G52-6-1709-106 G52-3-4300-109 G52-4-5200-106 G52-3-9903-104 G52-6-1701-100 G34-6-1709-104 G52-6-3004-108 653-1-0127-409 653-1-0159-008 G52-3-9901-100 Atd7436-L0 Atd7435-M0 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 - 8 Description Oil Filler Plug Hydraulic Unit Chain Saddle Assembly Angle Bar Tilt Screw Tilt Screw Tilt Knob Saddle Holder Caster Assembly Hand
Replacement Parts for Model Atd-7437 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - Part# 324-4-1900-208 G62-1-1000-108 G36-6-7000-102 G52-4-4102-101 G62-3-4200-101 G62-6-4302-109 G62-6-4501-105 G52-6-1709-106 G62-3-4203-109 G38-4-5200-102 G46-6-2101-101 G62-6-1701-108 G34-6-1709-104 653-1-0127-409 G62-3-9901-108 Atd7437-L0 Atd7435-M0 Description Oil Filler Screw Hydraulic Unit Chain Hook & Chain Saddle Plate Support Bar Tilt Screw Tilt Knob Saddle Holder Caster Assembly Handle Release Valve Release Valve Knob H
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to ATD Tools Inc. Warranty Service Department,160 Enterprise Drive, Wentzville, MO 63385.
