User Manual

10 sec

MAX

ATD-5524 & ATD-5525

User's Guide

Fuse Buddy Automotive Current Testers

MODELS: 5524 & 5525

Introduction

Fuse buddy Testers (models 5524 & 5525) can measure circuit amperage to 30A DC/AC. TESTING DURATION IS

LIMITED TO 10 SECONDS.

International Safety Symbols

Refer to the manual for further information

Controls

1. Fuse Buddy pins (5524 is Mini-Blade type; 5525 is ATC-Blade type)

2. Fuse Buddy fuse jack (5524 is Mini-Blade type; 5525 is ATC-Blade

type)

3. Cable

4. LCD display

5. Power ON/OFF

Model 5525

Model 5524

PAGE 1
ATD-5524 & ATD-5525 User's Guide Fuse Buddy Automotive Current Testers MODELS: 5524 & 5525 Introduction Fuse buddy Testers (models 5524 & 5525) can measure circuit amperage to 30A DC/AC. TESTING DURATION IS LIMITED TO 10 SECONDS. International Safety Symbols Refer to the manual for further information Controls 1 1. Fuse Buddy pins (5524 is Mini-Blade type; 5525 is ATC-Blade type) 2. Fuse Buddy fuse jack (5524 is Mini-Blade type; 5525 is ATC-Blade type) 2 MAX 10 sec 3 4 A 3. Cable 4.
PAGE 2
Specifications MODEL Fuse Type LCD Display/ Res. Measuring Range Accuracy 5524 30A /Mini-Blade • 100mA 30A/48VDC-10sec. ±(2.0% reading + 2 digits) 5525 30A/ ATC-Blade • 100mA 30A/48VDC-10sec. ±(2.0% reading + 2 digits) Operating Instructions MODEL: 5524/5525 CAUTION: 1. Do not test for longer than 10 seconds and do not test circuits over 30 Amps. IMPORTANT! TESTING DURATION LIMITED TO 10 SECONDS! TAKE THE READING AND THEN TURN OFF POWER TO THE CIRCUIT AFTER 10 SECONDS. 2.
PAGE 3