User's Manual

ManualsBrandsATD Tools ManualsAutomobile AccessoriesATD Tools Automobile Accessories ATD-80351



ATD‐80351

SABERII15WCORDEDUNDERHOODLIGHT

USER’SMANUAL

FEATURES:

• 30SuperBrightSMDLEDs

• 18/2SJTOW25ftcordremainsflexibleincoldweatherandwaterresistant

• ABShandlewithdoubleinjection,impactprotectionandergonomicdesignprovidescomfortableusage

• AluminumalloyhookwithPVCcoverforprotection,softcoatedpaddedhookshelppreventscratching

ofthe

vehiclessurface

• Thebarextendsfrom47"to70"andeasilyattachestomostSUV'sandtrucks

• 360degreeratchetinghooksprovidesafeandfirmattachm ent.

• CSAlisted

CaliforniaProp65WARNING:

Thisproductcontainschemicalsincludinglead,knowntotheStateofCaliforniatocause cancer,birthdefects,orother

reproductiveharm.Washhandsafterhandling.

Summary of content (6 pages)

PAGE 1
ATD‐80351 SABER II 15W CORDED UNDERHOOD LIGHT USER’S MANUAL FEATURES: • • • • • • • 30 Super Bright SMD LEDs 18/2 SJTOW 25ft cord remains flexible in cold weather and water resistant ABS handle with double injection, impact protection and ergonomic design provides comfortable usage Aluminum alloy hook with PVC cover for protection, soft coated padded hooks help prevent scratching of the vehicles surface The bar extends from 47" to 70" and easily attaches to most SUV's and trucks 360 degree ra
PAGE 2
General Safety Warnings: WARNING: The instructions and warnings contained in this manual should be read and understood before using or operating this tool. Do not allow anyone to use or operate this tool until they have read this manual and have developed a thorough understanding of how this tool works. Failure to observe any of the following instructions could result in severe personal injury to tool user and bystanders, or cause damage to the tool and property.
PAGE 3
WARNING: Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. This tool is equipped with a 3‐prong plug and a 3‐wire grounding system. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.
PAGE 4
NOTE: The table below shows the correct size to use according to cord length and the amperage draw of the tool (specified on the nameplate). When in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. (AWG = American Wire Gauge). Minimum Gauge for Extension Cords (AWG) (when using 120 volts only) Ampere Rating Total Length of Cord in Feet (meters) More Than Not More Than 25' (7.
PAGE 5
Operating Instructions: • • To use, plug the unit into any 110-120 VAC power source, such as a wall receptacle. Press the on/off switch (l) to turn unit on, press the other side of switch (0) to turn it off. • The hooks can be adjusted by simply pulling out on them and affixing to whatever surface you like, such as a car hood. (Up to 70” wide) • Once your light is in place, it can be rotated to the desired position by simply twisting the light. You will hear ratcheting “clicks” as you rotate it.
PAGE 6
ATD-80351 ITEM# 1 2 3 4 5 6 7 8 9 10 11 ORDERING PART# PRT80351-01 PRT80351-02 PRT80351-03 PRT80351-04 PRT80351-05 PRT80351-06 PRT80351-07 PRT80351-08 PRT80351-09 PRT80351-10 PRT80351-11 PART DESCRIPTION PULL ROD SCREW M5X9 LEFT HANDLE SET SCREW M3X5 PROTECTING COVER LED PCB CLEAR TUBE LOWER SCREW 2.