User's Manual

Intended use
The ATD10538 drill is intended for impact drilling in brick, concrete as well as for
drilling in wood, metal, ceramic and plastic.
Electrical safety
The electric motor has been designed for 120V only. Always check that the power
supply corresponds to the voltage on the rating plate.
Double insulation
This tool is double insulated in accordance with EN60745; therefore no earth
(ground) wire is required.
General safety rules for work with electric tools
Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury. The term
“power tool” in the warnings listed below refers to your electrically operated (corded)
power tool or battery operated (cordless) power tool.
Safety warning and precautions
Save this manual. You will need the manual for the safety warning and
precautions, assembly instructions, operating and maintenance procedures, parts
list and diagram. Read these instructions before operating this product. Save this
instruction and follow them to reduce the risk of fire, and personal injury.
1. Work area.
a) Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.