User's Manual

ManualsBrandsATD Tools ManualsFansATD Tools Fan ATD-30324

ATD-30324

24” DIRECT DRIVE DRUM FAN

INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

Failure to properly follow these instructions may lead to injury or bodily harm.

Item No.

Blade

Diameter

Voltage / Hz Current (A)

ATD-30324 24”/600mm 120V /60Hz 2.1

Summary of content (5 pages)

PAGE 1
ATD-30324 24” DIRECT DRIVE DRUM FAN INSTRUCTIONS Item No. Blade Diameter Voltage / Hz Current (A) ATD-30324 24”/600mm 120V /60Hz 2.1 READ AND SAVE THESE INSTRUCTIONS Failure to properly follow these instructions may lead to injury or bodily harm.
PAGE 2
California Prop 65 WARNING: This product contains chemicals including lead, known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling. General Safety Warnings: WARNING: The instructions and warnings contained in this manual should be read and understood before using or operating this fan. Do not allow anyone to use or operate this fan until they have read this manual and have developed a thorough understanding of how this fan works.
PAGE 3
WARNING: Never use the cord for carrying, pulling or unplugging the fan. Grasp plug and pull to disconnect from outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. WARNING: Ensure the switch is in the off position before plugging the fan into the power outlet. In the event of a power failure while the fan is being used, turn the switch off to prevent surprise starting when the power is restored.
PAGE 4
Operating Instructions: 1. Place the fan on a safe, flat surface where it cannot fall or be pulled by the cord. 2. Plug unit into electrical outlet. 3. Switch to Low or High speed for respective air velocity. 4. Always turn off and unplug fan after using.
PAGE 5
ATD-30324 ITEM# 1 2 3 4 5 6 7 8 ORDERING PART# PART DESCRIPTION PRT30324-01 FRONT GUARD PRT30324-02 BLADE PRT30324-03 DRUM PRT30324-04 REAR GUARD PRT30324-05 MOTOR PRT30324-06 SWITCH BOX PRT30324-07 WHEEL SHAFT PRT30324-08 SUPPORTING BAR Please contact jay@supertestusa.com for parts and service issues Made in China to ATD Tools, Visit us at www.atdtools.