User's Manual

10
Threading the Paper and Tape through the Cutting Blades:
Note: The upper tape rolls and upper paper roll will feed through the upper cutting blade.
The lower paper roll and lower tape rolls will thread through the lower cutting blade.
1. Pull out the paper from the roll, and pass it behind the cutting blade, under the spring,
over the cutting edge, and out to the front of the masking station.
2. Repeat step 1 with each roll of tape. If you have aligned the tape with the edge of the
paper attach the tape to the paper, and pull the paper/ tape combination through the
spring and out to the front of the masking station. Note that the spring holds the leading
edge of the materials onto the cutting bar, and also rubs the tape onto the paper just
before cutting.