User's Manual

2
WARNING
Do not overload this masking station; Keep the weight load of material stored on this
station balanced to prevent tipping. Use caution in working with the cutter blades,
they are very sharp.
NOTICE
The warnings and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
SAFETY WARNING & CAUTIONS:
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Do not use tools in damp,
wet or poorly lit locations. Don’t expose to rain. Keep work area well lit.
2. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let
them handle machines, tools, or equipment.
3. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
4. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for
which it was intended. Do not use inappropriate attachments in an attempt to exceed
the tool’s capacities.
5. USE THE RIGHT TOOL FOR THE JOB. Do not use a tool for a purpose for which it
was not intended.
6. DRESS PROPERLY. Do not wear loose clothing or jewelry, as they can be caught in
moving parts. Non-skid footwear is recommended. Wear restrictive hair covering to
contain long hair. Always wear appropriate work clothing.
7. DO NOT OVER REACH. Keep proper footing and balance at all times. Do not reach
over or across running machines.
8. MAINTAIN TOOLS WITH CARE. Keep tools maintained and clean for better and safer
performance.
SPECIAL WARNINGS WHEN USING THIS MASKING STATION
1. Wear appropriate work gloves and safety shoes when handling this cart and heavy
items.
2. Be careful when handling or storing sharp tools, knives, cleaners and solvents. Each of
these presents their own hazards. Check with the manufacturer’s warnings and
instructions when using these tools and materials.
3. Keep the weight load evenly balanced on the masking station. Excessively heavy loads
on the top or one side of the station may create instability, with danger of the cart
toppling over and possibly injuring a person or causing property damage.
4. Do not use solvents or flammable materials to clean this station. A mild detergent in
water will be sufficient. Solvents may damage the bins and the paint; and possibly
create fire hazard.
5. Be careful to avoid cutting yourself on the cutter blades, or on the edges of the paper or
tape you will be working with.