user manual

ATD-16812

WATERBORNE HVLP GRAVITY FEED SPRAY GUN

INSTRUCTION MANUAL



Specifications

• NozzleSize:1.2mm

• CupSize:.6Liter

• MaximumAirInletPressure:2bar(29PSI) 

• AverageAirConsumption:14CFM@29PSI

• AirInletThread:¼”NPSM

• NetWeightwithCup:1.8lbs

PAGE 1
ATD-16812 WATERBORNE HVLP GRAVITY FEED SPRAY GUN INSTRUCTION MANUAL Specifications • • • • • • Nozzle Size: 1.2mm Cup Size: .6 Liter Maximum Air Inlet Pressure: 2 bar (29 PSI) Average Air Consumption: 14 CFM@29 PSI Air Inlet Thread: ¼” NPSM Net Weight with Cup: 1.
PAGE 2
General Safety Precautions • During cleaning and flushing, solvents can be forcefully expelled from fluid and air passages. Some solvents can cause eye injury. • Be sure all others in the area are wearing impact resistant eye and face protection. • Even small projectiles can injure eyes and cause blindness. • Air under pressure can cause severe injury.
PAGE 3
Symptom Problem Solution FLUTTERING OR SPITTING Dry or worn needle packing seat permitting air to seep into fluid passage. Tighten, lubricate or change needle packing. Paint cup or joint cap leaking. Tighten or repair them. Packing fluid needle too loose. Tighten or repair them. PATTERN IS ARCED Dust or other foreign matter on air cap horn holes. Remove obstructions from air cap horn holes.
PAGE 4