Hydraulic Body Repair Kits Operating Instructions & Parts Manual Model Number Atd-5800 Atd-5810 Capacity 4 Ton 10 Ton (Model Atd-5810 shown) Atd Tools Inc. 114 I-70 Trade Center Drive, St.
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product.
GENERAL SAFETY INFORMATION OPERATION Read and understand all instructions and warnings provided with and on this product before use. 1. Ensure that attachments are fully engaged before applying load. 2. Ensure that load is centrally applied to attachment or ram saddle. Do not load off center. 3.
Lubrication A coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that pump assemblies move freely. Note: Never use sandpaper or abrasive material on these surfaces ! Storage When not in use, store with the pump piston and ram fully retracted. Cleaning Periodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.
REPLACEMENT PARTS Available Parts: Please refer to the Parts drawing when ordering parts. Not all components of this kit are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and description below. Call or write for current pricing: Atd Tools Inc. 114 I-70 Trade Center Drive, St. Peters, MO 63376 Tel:(636)272-9050 Fax:(636)272-9044 Model No. Atd-5800 Part No.
Model No. Atd-5810 Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 --- Description extension tube (27") extension tube (18") extension tube (10") extension tube (4-1/8") male connector wedge head (offset) serrated saddle flat base plunger toe (offset) ram toe (offset) rubber head combination head hydraulic spreader (1000 lb.
Notes Atd Tools Inc. 114 I-70 Trade Center Drive St. Peters, MO 63376 Tel: (636)272-9050 Fax: (636)272-9044 www.atdtools.
Notes Atd Tools Inc. 114 I-70 Trade Center Drive St. Peters, MO 63376 Tel: (636)272-9050 Fax: (636)272-9044 www.atdtools.
