Telescopic Transmission Jack Operating Instructions & Parts Manual Model Number Atd-7432 ! PDF Capacity 1000 Lb. !"# "pdfFactory Pro" $#%&'( www.fineprint.com.cn This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Atd Tools Inc.
SAFETY and GENERAL INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge.
ASSEMBLY (Refer to Figure 1) ! WARNING Estimated Assembly Time: 20 minutes. • Study, understand, and follow all printed materials provided with/on this product before use. • Do not exceed rated capacity. • Use only on hard, level surface. • Use of this jack is limited to the removal, installation and transportation of transmissions, transfer cases and transaxles. Do not use a transmission jack to tilt or support a vehicle. • Use only the saddle assembly to lift.
OPERATION MAINTENANCE Important: Use only good grade hydraulic jack oil. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the jack and the potential for sudden and immediate loss of load. Mobil DTE 13M or equivalent recommended. ! Ensure the transmission is centered on the jack. An off-center transmission could cause the jack to tip over resulting in personal injury or property damage.
TROUBLESHOOTING Symptom Possible Causes Corrective Action Jack will not lift load • Overload condition • Hydraulic unit malfunction • Remedy overload condition • Contact Atd Tools Tech. Service Jack will lift, but not maintain pressure • Overload condition • Hydraulic unit malfunction • Remedy overload condition • Contact Atd Tools Tech.
REPLACEMENT PARTS Not all components of the jack are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, part number and description below. Call or write for current pricing: Atd Tools Inc. 160 Enterprise Drive, Wentzville, MO 63385.
Replacement Parts List for Model Atd-7432 Item 1 2 3 4 5 6 7 8 Part No.
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to ATD Tools Inc. Warranty Service Department, 160 Enterprise Drive, Wentzville, MO 63385.
