Engine Sling Operating Instructions & Parts Manual Model Number Atd-7489 Capacity 1250 lb. Atd Tools Inc.
Save these instructions. For your safety, read, understand and follow the information contained within. The owner and operator shall have an understanding of this equipment and safe operating procedures before attempting to use. Instructions and Safety information shall be conveyed in the operators native language before use of this equipment is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the equipment.
OPERATION ! WARNING 1. There are three positions available to adjust the chain bracket width to fit most engine. Adjust to your best fit and ensure that the threaded pin is tighten. 2. Secure engine to the chain brackets 3. Engage the Engine Sling hanging chain to the engine crane hook. 4. Ensure the load is centered. 5. Follow vehicle service manual recommendations to remove engine. 6. Study and follow engine crane's operator instructions manual to remove/install engine. 7.
ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, ATD Tools Inc. will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy. Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to ATD Tools Inc. Warranty Service Department,160 Enterprise Drive, Wentzville, MO 63385.
PRODUCT SPECIFICATIONS MODEL #: ATD7489 DESCRIPTION: ENGINE SLING CAPACITY: 1250 LB. CHAIN LENGTH: 12" NET WEIGHT: 12.1 LB.
