User guide

Technical Specification
SD-POS-HA
Dimensions
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 09.03.11 ©
Display | POS Height Adjustable
NOTE:
! This product has been designed to mount VESA compliant displays with 75mmx75mm and 100mmx100mm hole patterns only.
! It will support displays upto a maximum weight of 20kg (44lbs). The Back-to-Back Mount will support 2x20kg (88lbs) displays.
! Warranty: 10 years limited
Front Cable Access Port
32mm x 46mm
(1.26” x 1.81”)
NOTE: If cable access through
the post and work surface is required,
you will need to drill a Ø45mm
Cable Access Hole
(refer to Installation Instructions).
159.2mm
(6.27”)
Back to Back Mount
Mounting Hole Options
OD
Ø45mm
(1.77”)
330-450mm
79.6mm
(3.13”)
224.68mm
(8.85”)
Ø106mm
(4.17”)
Mounting Plate F ootprint
133.1mm (5.24”)
84mm
(3.30”)
70.7mm
(2.78”)
M4 T apped
Holes
ID
Ø46mm
(1.81”)
Install Security
Cable around
Internal P ost
100mm
75mm
75mm
100mm
R otation
Y our POS HA
offers 355° of rotation.
This can also be limited to suit a specific
application.
The Direction in which you mount POS HA
will determine where the 5° gap in R otation
is located, and how you choose to limit the
rotation.
OR
USER
USER
5° Gap in
R otation
5° Gap in
R otation
270°
180°
0°
90°
270°
180°
0°
90°
355°
355°
Direction
Arrow
Direction
Arrow
0° L ocking Hole ( F ixed)
0-180° L ocking Hole
0-270° L ocking Hole
0-90° L ocking Hole
Direction Arrow
Locking Holes ( R efer to Installation Instructions for further details)
±20° R otation
about central
axis
VESA Ball Mount
Each Ball Assembly has 40 degrees rotation about i t ’s
central axis.
R otation Options
0° R otation ( F ixed)
0-90° R otation
0-180° R otation
0-270° R otation
0-355° R otation
SD-POS-HA-B2B
(12.99”-17.72”)