Installation manual Owner's manual

Locking Blocks

Step 4. Attach Top Caps to the installed Arm/Wall Mount

Step 5. Attaching Mounting Brackets to Display

TOP

Back of Display

Display Mounting Screw

Multiwasher

Mounting Bracket

The mounting brackets support

hole configurations from

200x100mm to 700x500mm.

WALL

Pull down both Spring Lock

Ties to open catch.

Hook the Display

to the Arm/Wall

Mount.

1 HOOK

3 PUSH

DOWN

1 HOOK

2 LOCK 4

2 PULL

DOWN

3 PUSH

DOWN

Push down Display into catch. Release Spring Lock Ties

to secure Display.

NOTE: Ensure that Spring

Lock is fully engaged.

RELEASE 4

Step 6. Attaching/Detaching Display to the installed Arm (2 people required)

Top Cap

SLIDE

Step 7. Attach Locking Blocks to fully secure the Display

Back of Display