Installation manual Owner's manual

FURNITURE
ROTATION
ADJUSTMENT
Check Clearance
Installation Instructions
TH-FM
Component Checklist
Furniture Mount
Pole Assembly
Horizontal Rail
! IMPORTANT - Install Telehook Furniture Mount as per installation instruction.
! This product supports a maximum load of 35kg (77lbs.).
! This product has a universal mounting hole pattern that suits a broad range of TV’s:
From 100-600mm in width and 100-400mm in height.
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Step 2. Limit Rotation and Position
2mm Allen Key
UP
Step 3. Check Space
Before installing your TH-FM check your
proposed location has enough space for
the amount of rotation you are planning
to use.
M6x10 Security
Screw (x3)
4mm Security
Allen Key
M8x45mm/65mm
Coach Bolt (x4 each)
Security Nut (x5)
IMPORTANT INFORMATION:
The Limit of Rotation
is dependant on the
location of the Set
Screw.
M6 Washer (x7)
M8 Washer (x4)
M6 Spacer (x4)
M8 Spacer (x4)
HARDWARE
Display Mounting
Screws (x4 each)
M6x16mm/30mm
M8x16mm/30mm
2mm Allen Key
NOTE: Use 2mm Allen Key to remove and insert M4x8
Grub Screw to the desired hole position.
M4x8 Set
Screw
points forward
Option 2
90°
Option 3
180°
Option 1 (Factory Set:
Set Screw at 0°)
Option 4 - remove Set Screw
for free 360° rotation.
WALL
WALL
Check Clearance
Tools Required:
• 8mm Drill Bit
• 50mm Hole Saw
• Adjustable Wrench
Mounting Bracket (x2) Top Cap