Installation manual Owner's manual

Step 8. Attach Bracket Mount to Display
Display Mounting Screw (x4)
Washer (4x)
Mounting Bracket (x2)
Spacer (x4)
(optional, use only for recessed
mounting holes.)
Back of Display
TOP
The mounting brackets support hole
configurations from 100x100mm to
600x400mm.
Remove the Locking Plate from each
Mounting Bracket using the 4mm
Security Allen Key supplied.
REMOVE
Locking Plate
4mm Security
Allen Key
Hook the Mounting Brackets to the
Horizontal Rail.
Slide the Display sideways to locate the centre.
SLIDE
LOCK
4mm Security
Allen Key
Step 10. Insert the Top Cap and Push down Base Cover in place
Step 9. Attach Bracket Mount with Display to Horizontal Rail
PUSH DOWN
Top Cap
Base Cover
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 30.07.12 ©
9A 9B 9C
INSERT
Front View of Top
Cap and Pole
NOTE: Make sure Top Cap cut-out is facing
the front when inserted.
cut-out
Pole
HOOK
Re-attach the Locking Plate from each Mounting
Bracket using the 4mm Security Allen Key sup-
plied to secure the Mounting Brackets in place.