product brochure Instruction Manual

Projector Mount | Ceiling tile
TH-PT8 /24
Atdec North America www.atdec.com
Atdec Global www.atdec.com.au
Max weight capacity
22.7kg (50lbs)
R
Product key features:
Designed to be used with Atdec Telehook and third party projector mounting solutions
Can be also used with non-standard tile configurations and ceiling types (PT8 only)
Gloss white finish which can be painted if required
Removable panels allow for connector block/ plug mounting
Supplied with mounting hardware to suit timber, concrete and truss beam ceiling supports
Supplied with a security / safety tie
Suit standard 8” and 24” tile matrix configurations
R
Suits suspended
ceiling structures
Allows alignment/focus
adjustment
Suitable for pole &
flush mounted projectors
Available in two sizes;
8” (TH-PT-8) and 24” (TH-PT-24)
Removable panels allow for
connector block mounting
Allows focal
length / alignment adjustment
Compatible with
Telehook
TH-WH-PJ-FM
and
TH-WH-PJ-CM
mounts
Supplied with an installation guide
Also compatible with
standard 1.5" NPT mounts
The Telehook 8" and 24" Ceiling Tiles are designed to assist with the mounting of
projectors into a suspended ceiling; providing a safe and secure attachment
point, improving the finished appearance, and enhancing cabling / connection
option. PT24 is designed to slot directly into a 24" grid as a replacement tile
while the PT8 is designed to be hidden above alternative grid configurations and
ceiling types. Both are compatible with the Telehook Flush and Pole mounts, as well
as 3rd party mounts which conform to the US 1.5” NPT standard. The tiles come with
attachment hardware to suit a variety of roofing structures and feature removable
panels for connector block / socket socket installation. Depending on the installation
orientation they can enable fine adjustment for either focal length or screen alignment.