Installation manual Manual

Step 5A. Insert Tilt Mechanism to Column Step 5B. Attach Mounting Bracket to Display
2 ROTATE
1 INSERT
INSERT
Display Mounting Screw
Washer
Mounting Bracket
M8x10mm Screw
M8 Washer
Extension Washer
Extension Bracket
Supplied Allen
Key
Step 8. Secure Display
Top of Display
Insert two M8x16mm screws
with M8 washers. Use
the supplied Allen Key to
tighten.
±90°
You can adjust
the display either
to Landscape or
portrait view.
Spacer
(optional, use only for
recessed mounting holes.)
M8x16 Screw
Step 6. Insert two M8x16 Screws Step 7. Attach Mounting Bracket to Tilt Mechanism
Leave 3-5mm gap
Top of Display
Step 9. Set to Landscape or Portrait
Top of Display
Top of Display
The mounting bracket supports 250 x 250mm up to 600 x 400mm VESA hole configurations.
To accomodate up to 800 x 600mm attach the supplied extension bracket as shown.