Manual

ManualsBrandsAtdec ManualsAudio Visual PresentationTelehook 39" Wall Plate for Telehook Video Wall Mount System

Installation Instructions

TH-VWV

TH-VWVP

TH-VWP-050

TH-VWP-080

TH-VWP-100

TH-VWP-160

Component Checklist

Universal Video Wall

! IMPORTANT - Install Telehook Video Wall as per installation instruction.

! This product supports a maximum load of 165kg (363lbs.) per panel or screen.

! The manufacturer accepts no responsibility for incorrect installation.

IMPORTANT INFORMATION:

Mounting Bracket (x2)

TH-VWVP

Mounting Bracket (x2)

TH-VWV

Wall Plate (1.6m)

TH-VWP-160

Wall Plate (0.8m)

TH-VWP-080

Wall Plate (0.5m)

TH-VWP-050

Wall Plate (1m)

TH-VWP-100

HARDWARE

Mounting Brackets

(TH-VWV, TH-VWVP)

Wall Plate 0.5m, 0.8m, 1m

(TH-VWP-050, TH-VWP-080, TH-VWP-100)

Wall Plate 1.6m

(TH-VWP-160)

Coach Screw

(x2)

Coach Screw

(x3)

M6 x 16/30/45/60

(x4)

M8 x 16/30/50/65

(x4)

Nylon

Anchor (x2)

Nylon

Anchor (x3)

8mm Washer (x2)

8mm Washer (x3)

Tools Required:

• Power Drill

• 8mm (0.31”) Drill Bit

• 10mm (0.39”) Masonry Drill Bit

• 13mm (0.51”) Socket Wrench

Shifter

• Phillips Head Screwdriver

• Spirit Level

• Tape Measure

M6 Washer (x4)

Spacer (x8)

Summary of content (5 pages)

PAGE 1
Installation Instructions TH-VWV TH-VWVP TH-VWP-050 TH-VWP-080 TH-VWP-100 TH-VWP-160 Universal Video Wall Component Checklist Wall Plate (0.5m) TH-VWP-050 Wall Plate (0.8m) TH-VWP-080 Wall Plate (1m) TH-VWP-100 Wall Plate (1.6m) TH-VWP-160 Mounting Bracket (x2) TH-VWV Mounting Bracket (x2) TH-VWVP HARDWARE Mounting Brackets (TH-VWV, TH-VWVP) M6 x 16/30/45/60 (x4) Wall Plate 0.5m, 0.
PAGE 2
Step 1. Check Components Check you have received all parts against the component checklist and hardware on the previous page. Step 2. Mounting Brackets Option A If the distance between the top of the display & mounting bracket is 80mm and under, mount directly onto the screen. 0~80mm IMPORTANT For the Brackets to function correctly they must be mounted as close to the top of the screen as possible.
PAGE 3
.3. Step B Position your wall plate, aligning the Contact Edge to your mark. Y Z Step A X = X + Y Combine both heights to find the height of the Contact Edge of the Wall Plate & mark this on the wall. Contact Edge with the Hook Please use a Spirit Level during installation to ensure that the Wall Plate is LEVEL 3.4. 2 coach screws are provided for the TH-VWP-050, TH-VWP-080, TH-VWP-100 and 3 coach screws are provided for the TH-VWP-160.
PAGE 4
Step 5. Mounting screens 5.1. Install the screens row by row, starting at the bottom. Ensure each row of screens are level before moving on to the next row. Installation may start from left or right. Screen shown in Landscape orientation Please use a Spirit Level during installation to ensure that the Screens are LEVEL Screen shown in Portrait orientation 5.2. Angle the screen as shown and position so the hook is above the bracket 5.3.
PAGE 5
6.2. To gain access for cabling: Pull out the bottom of the screen Push out the stop found on each bracket Push up the stop and gently lower the screen onto the wall. Step 7. Security (optional) Wall Plate The holes shown in the bracket and wall plate can accommodate security cabling and locks. Locks & cabling not supplied Step 8. Screen Removal To remove screen X for repair or replacement, tilt up the numbered screens in sequence, then pull out and lift off screen X.