Manual

Step 6. Cabling
Step 5. Mounting screens
Install the screens row by row, starting at the bottom.
Ensure each row of screens are level before moving
on to the next row.
Screen shown in
Portrait orientation
Screen shown in Portrait orientation
Screen shown in Landscape orientation
Screen shown in Landscape orientation
Installation may start from left or right.
Angle the screen as
shown and position
so the hook is above
the bracket
To adjust for uneven
walls, screw the leveling
bolt in or out to match
each display position.
Tilt up each row, starting at the top,
leaving each screen out until all cabling
is finished.
You may start from the left or right.
Level the screen by adjusting the screw at
the top of each mounting bracket. Use a
spirit level to ensure screen is level.
Phillips head
screw driver
Levelling bolt
Drop the hook
onto the bracket to
engage and gently
lower the screen
5.1.
5.2.
5.3. - Screen Levelling 5.3. - Wall Levelling
Please use a Spirit Level during installation to
ensure that the Screens are LEVEL
+/- 5mm
6.1. - Cabling sequence