Agilent 8643A, 8644B, 8664A, 8665A/B High Performance RF Signal Generators Data Sheet A commitment to value in signal generators
Agilent’s high performance RF signal generators – choose one for… …Best price to performance 8643A • • • • • • • • 252 kHz to 1030 MHz, 2060 MHz Option 002 For out-of-channel tests Electronic attenuator for high use Lowest cost of the "family" AM, FM, pulse modulation Built-in 2 GHz counter (Option 011) VOR/ILS signal simulation (Option 009) Ultra low leakage (Option 010) …Best spectral purity 8644B • • • • • • • • 252 kHz to 1030 MHz, 2060 MHz Option 002 Lowest SSB phase noise and spurious Highest outpu
Choose one for your application... 8643A 1 or 2 GHz 8644B 1 or 2 GHz 8664A 3 GHz 8665A/B A - 4.2 GHz/B - 6 GHz Ideal for receivers with <90 dB selectivity and/or spurious immunity of <85 dB Ideal for receivers with ≥90 dB selectivity and/or spurious immunity of ≥85 dB Ideal for receivers with ≥90 dB selectivity with Option 004, and/or spurious immunity of <85 dB to 3 GHz Same performance as 8664A but up to 6 GHz Electronic attenuator Lowest possible phase for increased reliability.
Performance backed by Agilent’s reputation and manufacturing experience Production margin Every Agilent Technologies’ signal generator meets specifications that would reject most other signal generators Before any Agilent Technologies’ signal generator is introduced, specifications are set to assure that the product will perform consistently for your application. The specification setting process is reflective of the quality that Agilent has always strived to deliver.
-60 -120 Option 004 -140 -160 10 RF leakage Due to radios becoming more sensitive and operating at higher frequencies, the traditional two-turn loop measurement of RF leakage has become inadequate. To overcome the shortcomings of the twoturn loop, Agilent has developed a new measurement technique using resonant dipole antennas, which is 20-25 dB more sensitive than the two-turn loop method.
Features that improve the usability of Agilent’s 8643A, 8644B, 8664A and 8665A/B for your application! Internal modulation source • Low distortion sinewaves to 400 kHz with variable phase and amplitude. • Triangle, sawtooth and squarewaves to 50 kHz with variable phase and amplitude. • White Gaussian noise with variable amplitude. • Two independent sources for two-tone testing.
Wideband FM (8664A and 8665A/B) Performance signal generator series features 2 GHz frequency counter (Option 011, 8643A and 8644B) • Typical rates to 5 MHz with 2 MHz of deviation, or rates to 800 kHz with 10 MHz of deviation (fc >1500 MHz) allows testing of most wideband receivers. • Excellent FM linearity is inherent due to YIG oscillator design. • Stable dc-coupled FM for measurements that require low carrier drift. • High stability oven controlled timebase is standard.
Specifications Frequency range: Resolution: Accuracy (std. timebase): <1 year of calibration Switching speed (typical): (within 100 Hz) 8643A 8644B 8664A 8665A/B .252 - 1030 MHz .252 - 2060 MHz Option 002 .252 - 1030 MHz .252 - 2060 MHz Option 002 .01 Hz .375x10-6 times carrier in Hz .01 Hz .375x10-6 times carrier in Hz .1 - 3000 MHz 8664A .1 -4200 MHz 8665A .1 - 6000 MHz 8665B .01 Hz .375x10-6 times carrier in Hz <90 ms <200 ms with FM on <350 ms <50 ms (within .
Specifications (continued) Output level Range: 8643A 8644B 8664A 8665A/B +13 to -137 dBm Resolution: Absolute accuracy: .01 Hz ±1 dB, output ≥-127 dBm ±3 dB, output <-127 dBm +16 to -137 dBm, +13 dBm, Option002 .
Specifications (continued) 8643A Pulse modulation On/off ratio: Rise/fall time, 10 - 90%: Repetition rate: Internal width/delay: Minimum width: Video feedthrough/overshoot: Output level accuracy: External inputs/outputs: Internal modulation source Number of sources: >35 dB, >80 dB, >1030 MHz <100 ns dc to 1 MHz N/A 0.5 µs <15% ±2 dB Input level: On state; >3.0 Vpeak (600 Ω input impedance) Off state; <0.
Specifications (continued) 8643A Avionics Option 009 VOR (108 to 118 MHz) ILS: localizer/glide slope (108 to 112 MHz/329.
Ordering information 8643A Options: 001 High stability time base with EFC 002 2 GHz doubled output 003 Rear panel input/output 004 Low noise option 005 Electronic attenuator (N/A with Option 002) 008 Pulse modulation 009 Specified VOR/ILS 010 Reduced leakage configuration 011 2 GHz internal frequency counter 907 Front handle kit (5061-9690) 908 Rack flange kit (5061-9678) 909 Combined front/rack flange kit (5061-9684) 910 Extra manual set (includes service manual) 915 Add service manual Service kit W30 Add