Agilent Ininiium 90000 Series Oscilloscopes Data Sheet Engineered for unmatched real-time measurement accuracy
Why choose Agilent oscilloscopes for your toughest high-speed measurement challenges? As an engineer you’re no stranger to tough challenges that help you exceed your customer’s needs and expectations. Deploying your next design successfully is even more dificult with today’s high speed technologies. Data signal eye openings become smaller and measurement error from your oscilloscope becomes less tolerable. Agilent is committed to providing the best measurement solutions for these critical challenges.
Engineered for unmatched real-time measurement accuracy. Use your jitter budget in your design, not on your oscilloscope. Agilent’s Infiniium 90000 Series oscilloscopes offer the industry’s lowest noise floor and most accurate real-time jitter measurements available on scopes of this bandwidth class.
Engineered for unmatched real-time measurement accuracy. Pass today’s demanding compliance tests more quickly. Offering the industry’s widest range of available compliance applications to provide fast setup for complete, automated compliance and margin testing and reporting, the Agilent 90000 Series scopes have become the go-to tool for test houses worldwide. Our experts serve on the industry standards committees, and our oscilloscopes are certified on today’s high speed serial data standards.
Engineered for unmatched real-time measurement accuracy. Debug your toughest designs with confidence. The 90000 series boasts an ever-expanding set of measurement applications for serial debugging and protocol viewing, jitter testing, advanced triggering, measurement customization, and rapid automation. Put the power of the scope to work for your unique debug and analysis challenges.
Engineered for unmatched real-time measurement accuracy. Debug your toughest designs with confidence. I2C/SPI serial trigger and decode (N5391A or Option 007 on new scope purchases) Given even further insights with protocol decode capability. Quickly move between physical and protocol layer information using the time-correlated tracking marker. Display protocol content using waveform symbols and the industry’s first multi-tab protocol viewer. The packets tab shows a high level view of the packet over time.
Debug your toughest designs with confidence EZJIT analysis software (E2681A or option 002 on new scope purchases) Quickly characterize and evaluate most commonly needed jitter measurements, including cycle-cycle, N-cycle, period, time-interval, error, setup and hold time, histograms, measurement trending and jitter spectrum. Includes advanced clock recovery options such as constant frequency and PLL. Make measurements on repetitive or arbitrary data.
Debug your toughest designs with confidence InfiniiScan event identification (N5414B or Option 009 on new scope purchases) Rapidly trigger on complex events and identify signal integrity issues. This innovative software quickly scans through thousands of acquired waveform cycles and isolates anomalous signal behavior. This application is supported on all models. For more information: www.agilent.com/find/infiniiScan Identify signal integrity issues with InfiniiScan Zone – Qualify triggering.
Debug your toughest designs with confidence Infiniium Remote Programming interface (Now standard on all Infiniium scopes) Operate your Ininiium compliance and validation applications remotely using .NET languages. This application is supported on all models. For more information: www.agilent.com/find/RPI Control your applications remotely. Serial Data Equalization (N5461A or Option 012 on new scope purchases) Measure at the pin and use equalization to see a virtual eye on the other side of an equalizer.
Debug your toughest designs with confidence MATLAB® data analysis software (Option 061 or O62 on new scope purchases) Control your applications remotely. MATLAB is a data analysis software environment and scripting language used by over 1,000,000 users in aerospace/defense, automotive, communications, electronics, and other applications. MATLAB is now available directly from Agilent as in instrument option with the purchase of your Agilent 90000 Series oscilloscope.
Debug your toughest designs with confidence I2C/SPI serial trigger and decode (N5391A or Option 007 on new scope purchases) This application displays real-time time-aligned decode of I2C and SPI packets. View decode in waveform area or in protocol lister. This application works on all models. For more information: www.agilent.com/find/90000_I2C-SPI Trigger and view on-screen serial decode of I2C packets. JTAG (IEEE 1149.
Pass today’s demanding compliance tests more quickly USB serial trigger and protocol viewer (N5464A or Option 016 on new scope purchases) Trigger on and quickly view USB 2.0 packets, payload, header and detail information. Powerful time-correlated views of waveform and symbol, to the bit level, make it easy to isolate communication faults. This application is supported on all models. For more information: www.agilent.com/find/90000_USB_protocol_viewer Trigger on and decode USB packets.
Pass today’s demanding compliance tests more quickly MIPI D-phy trigger and decode (N8802A or Option 019 on new scope purchases) This application eliminates the need to manually decode bus trafic. Using data captured on the scope, the application lets you easily view the information sent over MIPI serial buses. The application also enables software based protocol triggering. This application is supported on all models >=4 GHz bandwidth. For more information: www.agilent.
Pass today’s demanding compliance tests more quickly Fully Buffered DIMM Compliance Application (N5409A or Option 024 on new scope purchases) Quickly characterize and evaluate the signal integrity of both your high speed FB-DIMM signals as well as your reference clock. All tests are based on the JEDEC High Speed Point-to-Point Link Speciication. This application is supported on all models >=10 GHz bandwidth. For more information: www.agilent.
Pass today’s demanding compliance tests more quickly USB 2.0 Compliance Test Software (N5416A or Option 029 on new scope purchases) Quickly determine USB compliance with this USB-IF recognized solution. A setup wizard guides you through test selection and coniguration. This application is supported on all models. For more information: www.agilent.com/find/N5416A Check for USB compliance.
Pass today’s demanding compliance tests more quickly 10GBASE-T Ethernet Electrical Conformance Application for Infiniium Oscilloscopes (U7236A or Option 036 on new scope purchases) Takes care of the tedious task of instrument control and conigures the oscilloscope, spectrum analyzer, or vector network analyzer as needed by each 10GBASE-T test to provide rapid, accurate, and repeatable test execution. The application is supported on all models. For more information: www.agilent.
Agilent Infiniium portfolio Agilent’s Ininiium oscilloscope lineup includes bandwidths from 600 MHz to 63 GHz. Use the following selection guide to determine which best matches your speciic needs. Ininiium real-time oscilloscopes feature the following: • World’s highest bandwidth on 4 channels in a single frame • Industry’s lowest noise loor • Full PrecisionProbe compatibility Up to 4 GHz Available bandwidths 9000 Series 90000A Series 600 MHz, 1 GHz, 2.5 GHz, 4 GHz 2.
Infiniium 90000A Series Starting with an 18-GHz, BNC-compatible connector, an ultra-low noise floor front end design using Faraday cage technology ensures high signal integrity in its signal path. Click on the icon at the bottom left of the Infiniium screen to minimize the status and scales tab for full screen viewing. Maximize your viewing needs. Ever wanted to change the scale or offset of a function or waveform memory? If you have, you know that it requires multiple menus and key strokes.
AutoProbe interface completely configures your scope for use with the InfiniiMax probing system and previous-generation Agilent active probes. Simply press the horizontal delay knob to set the delay value to zero. A zoom button provides quick access to two screen zoom mode. Dedicated single acquisition button provide better control to capture an unique event. Customizable Multipurpose key gives you any five automated measurements with a push of a button.
InfiniiMax II: The World’s best high-speed probing system just keeps getting better InfiniiMax offers you the highest performance available for measuring differential and single-ended signals, with flexible connectivity solutions for today’s high-density ICs and circuit boards. InfiniiMax probes have fully characterized performance for all E2677A 12-GHz solder-in differential probe head can be of their various probe heads.
Six different InfiniiMax probe amplifiers from 1.5 GHz to 13 GHz are available for matching your probing solution to your performance and budget requirements. The 1168/69A InfiniiMax II amplifiers offer the highest bandwidth and the lowest noise floors. The 1134/32/31/30A offer a more cost efficient solution and wider dynamic range. N5382A 13-GHz high-bandwidth differential browser provides maximum bandwidth for hand-held or probe holder use. Variable spacing from 0.2 to 3.3 mm (8 to 130 mills).
Infiniium 90000A Series Oscilloscopes Performance characteristics Vertical Input channels Four Analog bandwidth (–3 dB)*, 10 90254A 2.
Infiniium 90000A Series Oscilloscopes Performance characteristics Vertical (continued) RMS noise floor (scope with probe) Volts/div 20 mV 50 mV 100 mV 200 mV 500 mV 1V 90254A with 1131A 3.2 mV 3.3 mV 3.4 mV 4.0 mV 7.1 mV 13 mV 90404A with 1132A 3.5 mV 3.6 mV 3.8 mV 4.6 mV 8.6 mV 16 mV 90604A with 1134A 4.0 mV 4.0 mV 4.3 mV 5.3 mV 10 mV 19 mV 90804A with 1168A 2.2 mV 2.3 mV 2.9 mV 4.7 mV 12 mV 23 mV 91204A with 1169A 2.5 mV 2.8 mV 3.5 mV 5.
Infiniium 90000A Series Oscilloscopes Performance characteristics Acquisition Maximum real-time sample rate 91304A/91204A/90804A: 40 GSa/s (4 channels simultaneously) 90604A/90404A/90254A: 20 GSa/s (4 channels simultaneously) Memory depth per channel Standard Option 50M Option 100 Option 200 Option 500 Option 01G 20 Mpts on 4 channels 50 Mpts on 4 channels (standard on DSA models) 100 Mpts on 4 channels 200 Mpts on 4 channels 500 Mpts on 4 channels 1 Gpts on 4 channels Maximum acquired time at highest r
Infiniium 90000A Series Oscilloscopes Performance characteristics Hardware trigger Sensitivity1 Level range Internal Auxiliary 91304A/91204A/90804A: Internal low1: Internal high1: 11 90604A/90404A/90254A : Internal low1: Internal high1: Auxiliary: 2.0 div p-p 0 to 5 GHz 0.3 div p-p 0 to 4 GHz, 1.0 div p-p 4 to 7.5 GHz 2.0 div p-p 0 to 5 GHz 0.3 div p-p 0 to 3 GHz, 1.
Infiniium 90000A Series Oscilloscopes Performance characteristics Hardware trigger (continued) Trigger modes (continued) Window Video Triggers on an event associated with a window defined by two-user adjustable thresholds. Event can be window “entered,” “exited,” “inside (time qualified),” or “outside (time qualified)” voltage range. Trigger point can be “cross window boundary” or “time out.” Time qualify range: from 250 ps to 10 s.
Infiniium 90000A Series Oscilloscopes Performance characteristics Measurements and math (continued) Waveform measurements Voltage Time Mixed Frequency domain Level qualification Peak to peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, preshoot, upper, middle, lower Rise time, fall time, period, frequency, positive width, negative width, duty cycle, burst width, Tmin, Tmax, Tvolt, setup time (requires Option 002, 004, or 070 standard on DSA models), hold time (requires Option 002, 004
Infiniium 90000A Series Oscilloscopes Performance characteristics Measurements and math (continued) FFT (continued) Signal-to-noise ratio5 Window modes Measurement modes Automatic measurements 60 dB to > 100 dB depending on settings Hanning, flattop, rectangular, Blackman-Harris Measure menu access to all measurements, ten measurements can be displayed simultaneously Multipurpose Front-panel button activates ten pre-selected or ten user-defined automatic measurements Drag-and-drop measurement toolbar M
Infiniium 90000A Series Oscilloscopes Performance characteristics Computer system and peripherals, I/O ports (continued) I/O ports (continued) PCI Express GPIB RS-232 (serial) Parallel PS/2 USB 2.0 hi-speed (host) USB 2.0 hi-speed (device) Dual-monitor video output Auxiliary output Trigger output Time base reference output Time base reference input LXI compliance PCI Express x4 link, enabled by sockets (optional- Option 823) IEEE 488.
InfiniiMax II Series Performance characteristics 1169A, 1168A Bandwidth* 1169A: > 12 GHz (13 GHz typical) Rise and fall time Probe only 1169A: 28 ps (20 - 80%), 40 ps (10 - 90%) 1168A: 34 ps (20 - 80%), 48 ps (10 - 90%) 1169A w/91204A: 25 ps (20 - 80%) 36 ps (10 - 90%) 1169A w/91304A: 23 ps (20 - 80%) 33 ps (10 - 90%) 1168A w/90804A: 38 ps (20 - 80%) 54 ps (10 - 90%) System bandwidth (–3 dB) 1169A w/91304A: 13 GHz (typical) 1169A w/91204A: 12 GHz 1168A w/90804A: 8 GHz Input capacitance1 Cm = 0.
InfiniiMax I Series Performance characteristics 1134A, 1132A, 1131A, 1130A Bandwidth* 1134A: > 7 GHz 1132A: > 5 GHz 1131A: > 3.5 GHz 1130A: > 1.5 GHz Rise and fall time (10% to 90%) 1134A: 60 ps 1132A: 86 ps 1131A: 100 ps 1130A: 233 ps System bandwidth (–3 dB) 1134A w/90604A: 6 GHz 1132A w/90404A: 4 GHz 1131A w/90254A: 2.5 GHz Input capacitance1 Cm = 0.10 pF Cg = 0.34 pF Cdiff = 0.27 pF Cse = 0.
Infiniium 90000 Series ordering information Infiniium DSA/DSO90000A Series oscilloscopes Model Bandwidth Channels Sample rate Standard memory DSA/DSO91304A 13 GHz 4 40 GSa/s 20 Mpts/50 Mpts (DSA) DSA/DSO91204A 12 GHz 4 40 GSa/s 20 Mpts/50 Mpts (DSA) DSA/DSO90804A 8 GHz 4 40 GSa/s 20 Mpts/50 Mpts (DSA) DSA/DSO90604A 6 GHz 4 20 GSa/s 20 Mpts/50 Mpts (DSA) DSA/DSO90404A 4 GHz 4 20 GSa/s 20 Mpts/50 Mpts (DSA) DSA/DSO90254A 2.
Infiniium 90000 Series ordering information Factory installed option for new purchases User installed standalone product number SW applications 002 E2681A EZJIT jitter analysis software (standard on DSA Series) 003 E2688A High-Speed serial data analysis with clock recovery and 8b/10b decoding (standard on DSA Series) 004 N5400A EZJIT Plus jitter analysis software (standard on DSA Series) 005 N5403A Noise reduction and bandwidth control option (standard on DSA Series and DSO91304A) 007 N5391A
Infiniium 90000 Series ordering information Oscilloscope bandwidth upgrades Upgrade Descriptions N5471A DSA/DSO91204A to DSA/DSO91304A upgrade (12 GHz to 13 GHz) N5471B DSA/DSO90804A to DSA/DSO91204A upgrade (8 GHz to 12 GHz) N5471C DSA/DSO90604A to DSA/DSO90804A upgrade (6 GHz to 8 GHz) N5471D DSA/DSO90404A to DSA/DSO90604A upgrade (4 GHz to 6 GHz) N5471E DSA/DSO90254A to DSA/DSO90404A upgrade (2.
Agilent Technologies Oscilloscopes Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications 35
www.agilent.com www.agilent.com/find/90000A myAgilent myAgilent www.agilent.com/find/myagilent A personalized view into the information most relevant to you. www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Agilent is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system.
