User Manual

13
Pass today’s demanding compliance tests more quickly
MIPI D-phy trigger and decode (N8802A or Option 019 on new scope purchases)
This application eliminates the need to manually decode bus traffic. Using data
captured on the scope, the application lets you easily view the information sent over
MIPI serial buses.
The application also enables software based protocol triggering.
This application is supported on all models >=4 GHz bandwidth.
For more information: www.agilent.com/find/N8802A
Trigger on and decode MIPI packets.
Ethernet compliance testing (N5392A or Option 021 on new scope purchases)
Perform a wide range of electrical tests for 10-, 100-, and 1000-Base-T systems. An
N5395B or N5395C test fixture and N5396A jitter test cable speed compliance testing.
This application is supported on all models.
For more information: www.agilent.com/find/N5392A
Validate Ethernet compliance.
PCI EXPRESS
®
Electrical Performance Validation and Compliance Software
(N5393B or Option 022 on new scope purchases)
Provides fast and easy way to verify and debug your PCI EXPRESS designs. Allows
you to automatically execute PCI EXPRESS electrical checklist tests, and displays
the results in a flexible report format. Ensures that your Gen2 measurements will
have absolute consistency with measurements made using the PCI-SIG’s standalone
Sigtest software.
This application is supported on all models >=8 GHz bandwidth.
For more information: www.agilent.com/find/N5293B
Quickly verify and debug your PCI EXPRESS
®
designs.
HDMI
™
Electrical Performance Validation and Compliance Software (N5399A or
Option 023 on new scope purchases)
Quickly verify and debug your High Definition Multi-media Interface (HDMI) designs.
The N1080A fixture provides access to the compliance points for the electrical
measurements required for the transmitter compliance testing.
This application is support on all models >=8 GHz bandwidth.
For more information: www.agilent.com/find/N5399A
Verify and debug your HDMI designs.