User Manual

Pass today’s demanding compliance tests more quickly

Fully Buffered DIMM Compliance Application (N5409A or Option 024 on new scope

purchases)

Quickly characterize and evaluate the signal integrity of both your high speed FB-DIMM

signals as well as your reference clock. All tests are based on the JEDEC High Speed

Point-to-Point Link Speciﬁcation.

This application is supported on all models >=10 GHz bandwidth.

For more information: www.agilent.com/find/N5409A

Characterize and evaluate the signal

integrity of both your high speed FB-DIMM

signals as well as your reference clock.

Energy Efﬁcient Ethernet Application (N5392B or Option 060 on new scope purchases)

Industry leading compliance application that measures 10/100/1000BTe Energy Efﬁcient

Ethernet IEEE 802.3az-2010 speciﬁcation. Exclusive EEE ﬁxture allows you to measure

all test modes at all speeds. Detailed reporting with clear measurements and pass/fail

results.

This application is supported on all models.

For more information: www.agilent.com/find/EEE

Characterize and evaluate the signal

integrity of your Energy Efﬁcient

Ethernet devices.

SATA 6G Compliance Test Software (N5411B or Option 038 on new scope purchases)

Rapidly validate and debug your SATA 1.5Gb/s (Gen 1), 3.0 Gb/s (Gen2) and 6.0 Gb/s

(Gen3) silicon, host bus adapter, port multiplier, high-density disk drive, solid-state

disk drive or optical disk drive. Provides automated compliance test support for the i

(internal), m(eSATA) and x(SAS attachment) interfaces points, and displays the results

in a ﬂexible report format.

This application is supported on all models >= 12 GHz bandwidth.

For more information: www.agilent.com/find/N5411B

Simplify the validation of SATA designs.

U7232B DisplayPort Compliance Test Software (U7232B or Option 045 on new scope

purchases)

Sets the benchmark for ease-of-use, and offers complete testing without compromise.

The software guides the user sequentially through the tasks ensuring minimal setup error,

executes the tests speciﬁed by the standard and conveys the test information through a

convenient software generated report. The three modes of physical layer test allow for

automated measurements based on the customizable conﬁguration of compliance and

characterization testing. To make the test signal connection, the Agilent W2641B Display-

Port test point access adaptor completes the DisplayPort source solution.

The application is supported on all models >= 8 GHz.

For more information: www.agilent.com/find/U7232B

Full suite of DisplayPort source tests.