User Manual

15
Pass today’s demanding compliance tests more quickly
USB 2.0 Compliance Test Software (N5416A or Option 029 on new scope purchases)
Quickly determine USB compliance with this USB-IF recognized solution. A setup
wizard guides you through test selection and configuration.
This application is supported on all models.
For more information: www.agilent.com/find/N5416A
Check for USB compliance.
XAUI Electrical Validation with 10GBASE-CX4, CPRI, OBSAI, and Serial RapidIO
Support (N5431A or Option 030 on new scope purchases)
Improve your efficiency by confirming that your devices conform to the XAUI specifi-
cations as defined by the IEEE 802.3-2005 10-gigabit Ethernet specification. Provides
support for the XAUI-derived 10GBASE-CX4 specification.
The application is supported on all models.
For more information: www.agilent.com/find/N5431A
Perform automated testing and margin analysis
for XAUI and XAUI-derived specifications.
DVI Electrical Performance Validation & Compliance Software (N5394A or Option 034
on new scope purchases)
Automatically execute DVI electrical checklist tests and display the results in a flexible
report format. In addition to the measurement data, the report provides a margin analy-
sis that shows how closely your device passed or failed each test.
The application is supported on all models >= 4GHz.
For more information: www.agilent.com/find/90000
Verify and debug your DVI designs more easily.
MIPI D-PHY Compliance Test Software (U7238A or Option 035 on new scope
purchases)
Automatically execute D-PHY electrical checklist tests for CSI and DSI architectures.
Displays the results in a flexible report format.
The application is supported on all models.
For more information: www.agilent.com/find/d-phy_compliance
Automatically execute D-PHY electrical checklist
tests for CSI and DSI architectures.