After opening the box, please check to ensure that the following accessories are provided with the monitor (Option) Pivot Software ▼ Use’ rs Guide ▼ D-Sub Signal Cable ▼ (Option) USB Cable ▼ Power Cord ▼ DC Power Supply Unit ▼ The actual monitor and accessories may appear differently from those shown on the above figure.
Before Use Features 1 Instructions for Safety 2 How do I Use the Monitor ? How do I Connect the Computer Cables ? 6 How do I Connect with the IBM computer ? The Name and Function of Each Individual Part 7 Front view Back view The name and function of each individual part in the screen adjusting block How to Select and Adjust the OSD (On Screen Display) 9 To adjust the brightness and contrast of the screen ? To select / adjust the color of the screen ? To adjust the up/down/left/right position of t
15.1”LCD Panel Adopted -Adopted the 15.1”LCD (Liquid Crystal Display) Panel which allows you efficient use in a small space due to the slim design. A Dynamic Convenient Design -Uses a specially manufactured hinge (ATEC System patent) to adjust the screen freely up and down, left to right, and back and forth. This function is provided with thoughtful consideration to the user’s convenience.
▶Matters that demand special attention are divided into ‘Warning’and‘Caution’, and are detailed a follows Warning In case of the possibility that a serious injury or death may occur during a violation of the instructions. ※The sign on the product and user’ s guide instructs as following. Caution In case of the possibility that a slight injury or product damage may occur during a violation of the instructions.
Warning Please be careful to keep the panel from being scratched or damaged when you transport the monitor. Please insert the two pins of the plug completely so that the power supply unit can be connected tightly. The panel may be damaged, causing a failure. Unsafe power connections may cause a fire. Don’t set up the equipment in a humid environment (such as bathroom, rainy or windy area, etc). Please stop using in case of smoke or abnormal odors.
Warning Never touch the power plug with wet hands. An electric shock accident may occur. Please set up the monitor at a proper distance (over 10 cm) away from the wall for sufficient ventilation. A fire may be caused due to an increase in internal temperature. Please note that air-flow holes must not be blocked by a table cloth or curtain. A fire may becaused due to an increase in internal temperature. Don’t use a power cord or plug that is damaged or has a loose connection.
Warning You must switch the power off and pull the power cord out before moving the monitor. You should also check as to whether external connection cords - such as the connection cords between component parts - are all pulled out before the movement. Pull the power cord out when the monitor is not used for a long time, or while you are away. A dust covering may cause an electric shock, electric leakage, or fire by heat generation, ignition, and insulation degradation.
How do I connect the computer cables? No signal message How do I connect with the IBM computer ? If the signal input cable 1. 2. Ensure that the computer, monitor and peripheral equipment power is turned off. Connect signal cables with the D-sub signal input connector and the monitor signal input connector respectively. between the monitor and computer isn’ t correctly connected, this message will be displayed on the screen. For more information, please refer to‘Troubleshooting’. 3.
The Name and Function of Each Individual Part Front View Power Button UP/DOWN Button SELECT Button MENU Button Back View Power Pilot Lamp
The Name and Function of Each Individual Part The Name and Function of Each Individual Part in the Screen Adjusting Block AUTO Function If you select the SELECT Power Pilot Lamp button before using the Lights up during the opera tion but goes out if you turn the power off. automatically adjusted to OSD menu, the screen is the optimal display state applicable to the current mode, while the following Power Button message appears.
How to Select and Adjust the OSD (On Screen Display) Screen Use the OSD adjustable buttons on the front of the monitor to set/adjust to the best screen and operating environment. If you have to adjust the screen, please adhere to the following procedure. Press the MENU button which displays the OSD menu screen. Select the icon you desire by pressing the UP/ DOWN button. Then press the SELECT button. Adjust the screen with the UP/DOWN buttons. Save the adjustment by pressing the SELECT button.
How to Select and Adjust the OSD (On Screen Display) Descriptions of OSD adjustment and functions To adjust the brightness and contrast of the screen? Brightness Adjusts the brightness of the screen. Pressing the button darkens the background screen. Pressing the button brightens the background screen. Contrast Adjusts the contrast of the screen. Pressing the button darkens a screen picture. Pressing the button brightens a screen picture.
How to Select and Adjust the OSD (On Screen Display) Descriptions of OSD Adjustment and Functions To adjust the up/down/left/right position of the screen? Moves the screen up and down. Moves the screen left and right. To adjust the horizontal size of the screen or focus the phase? Horizontal Size (CLOCK) Adjusts the horizontal size of the screen by increasing / decreasing the number of pixels. Please adjust the display to the Full Screen size. Focus (PHASE) Brings the phase into focus.
Troubleshooting. Please read before notifying our repair officers of a failure Please check the below particulars before you contact the service center to notify an abnormality of the monitor. Check these points Take these respective actions This symptom can be discovered Is the monitor power cord inserted ? Please connect the power cord correctly to the concent. Is the power turned off ? Please press the power button.
Troubleshooting. Please read before notifying our repair officers of a failure Check these points Take these actions Has a discoloration (into 16 colors) of the screen occurred? Set the number of colors to more than 256 colors.
Troubleshooting. Please read before notifying our repair officers of a failure Check these points Is the positional adjustment made correctly? Take these actions Selecting the SELECT button automatically adjusts the screen in the best state applicable to the current mode. If you are not satisfied with the auto adjustment, you can directly adjust the H Position (Horizontal Position), V Position (Vertical Position), and Clock (Horizontal Size) of the OSD menus.
Product Specification The details of product specification can be changed without notice to improve the product. panel type screen size pixel size contrast color resolution brightness a-Si active matrix TFT-LCD 15.1”(38cm) diagonal 0.3mm x 0.3mm 300:1(Typical) 8-bit(16,777,216 Colors) XGA 1024 x 768 250c2d/m2(Typical) Picture Signal horizontal frequency vertical frequency view angle input picture signal 31.
Product Specification Factory-specified Mode Factory-specified Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VGA MAC VESA VESA VESA VGA VESA VESA VESA VESA MAC VESA VESA VESA 640 x 350 640 x 480 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1024 x 768 Vertical Horizontal Frequency(kHz) Frequency(Hz) 31.47 35.00 31.47 37.86 37.50 31.47 35.16 37.88 48.68 46.88 49.73 48.36 56.48 60.