User Manual

Installing the Monitor
3
This section identifies the name of each component of the monitor and briefly
describes the function of each component.
MENU Button
Displays or Exits the OSD
menu window.
POWER Button
Turns the monitor on and off.
SELECT Button
Selects the OSD menu item
and the submenu item to be
adjusted in the OSD menu
window and save the modified
value at any selected item.
(If you press continuously every
two times, the input source will
be switched.)
RIGHT Button
Increases the value of
the selected item.
(Increases the volume
without pressing the
MENU Button.)
LEFT Button
Decreases the value of the
selected item. (Decreases the
volume without pressing the
MENU Button.)
DOWN Button
Moves to the down menu
item in the OSD menu window.
AUTO Button
Press the AUTO button with no OSD
menu shown on the screen, and the
screen is automatically adjusted into
the optimal state applicable to the
current mode, showing the
PROGRESSING AUTO
CONFIGURATION message.
If you are not satisfied with the auto
adjustment, you can additionally
adjust the H/V Position, Clock and
Phase of the OSD menus. (For the
OSD menu setup method, refer to the
‘OSD Menu Functions’)
UP Button
Moves to the up menu item in the OSD menu window.
POWER LED
Indicates the monitor power status.
Green : Monitor activated.
Orange : Monitor standby/Monitor power saving
mode/VGA signal cable unhooked.
TFT LCD Display
Displays the current contents
of the display.
Front Side
1.3 Monitor Overview