Instruction Manual

Page 6 of 12
Spectrum Master™ MS2712E and MS2713E Specifications
Interference Analyzer (Option 0025)
Measurements Spectrum
Field Strength
Occupied Bandwidth
Channel Power
Adjacent Channel Power (ACPR)
AM/FM/SSB Demodulation (Wide/Narrow FM, Upper/Lower SSB), (audio out only)
Carrier-to-Interference ratio (C/I)
Spectrogram (Collect data up to one week)
Signal Strength (Gives visual and aural indication of signal strength)
Received Signal Strength Indicator (RSSI) (collect data up to one week)
Gives visual and aural indication of signal strength
Signal ID (up to 12 signals)
Center Frequency
Bandwidth
Signal Type (FM, GSM, W-CDMA, CDMA, Wi-Fi)
Closest Channel Number
Number of Carriers
Application Options Signal-to-Nose Ratio (SNR) >10 dB

Channel Scanner (Option 0027)
Number of Channels 1 to 20 Channels (Power Levels)
Measurements Graph/Table, Max Hold (On/5 sec/Off), Freq/Channel, Current/Max, Single/Dual Color
Scanner Scan Channels, Scan Frequencies, Scan Customer List, Scan Script Master™
Amplitude Reference Level, Scale
Custom Scan Signal Standard, Channel, # of Channels, Channel Step Size, Custom Scan
Frequency Range 
Frequency Accuracy ±10 Hz + Time base error
Measurement Range -110 dBm to +26 dBm
Application Options 
CW Signal Generator Option (Option 0028) 
Setup Parameters
Frequency Frequency, Signal Standard, Channel Number, Display Setup Help
Amplitude Power Level (Low/High), Offset (dB)
Frequency Range 25 MHz to 2 GHz typical
Output Power 

Gated Sweep (Option 0090)
Mode Spectrum Analyzer, Sweep
Trigger External TTL
Setup Gated Sweep (On/Off)
Gate Polarity (Rising, Falling)
Gate Delay (0 to 65 ms typical)
Gate Length (1 µs to 65 ms typical)
Zero Span Time