Instruction Manual
Spectrum Master™ MS2712E and MS2713E Specifications
General Specifications
notice; 4) Typical performance is the measured performance of an average unit; 5) Recommended calibration cycle is 12 months.
Setup Parameters
System Status (Temperature, Battery Info, Serial Number, Firmware Version, Options Installed)
Self Test, Application Self Test
System Options
Name, Date and Time, Brightness, Volume
Reset (Factory Defaults, Master Reset, Update Firmware)
File Save, Recall, Delete, Directory Management
Save/Recall Setups, Measurements, Screen Shots Jpeg (save only)
Delete Selected File, All Measurements, All Mode Files, All Content
Directory Management Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy, Format USB
Internal Trace/Setup Memory 2,000 traces, 2,000 Setups
External Trace/Setup Memory Limited by size of USB Flash drive
Mode Switching Auto-Stores/Recalls most recently used Setup Parameters in the Mode
Connectors
RF Out
RF Out Damage Level
RF In
RF In Damage Level
GPS SMA(f)
External Power 5.5 mm barrel connector, 12.5 to 15 VDC, < 4.0 Amps
USB Interface (2) Type A, Connect USB Flash Drive and Power Sensor
USB Interface 5-pin mini-B, Connect to PC for data transfer
Headset Jack 2.5 mm mini-phone plug
External Reference In
External Trigger/Clock Recovery
Display
Type Resistive Touchscreen
Size
Resolution
Battery
Type Li-Ion
Battery Operation
Electromagnetic Compatibility
European Union
Australia and New Zealand
Interference
Emissions EN 55011
Immunity
Safety
Safety Class EN 61010-1 Class 1
Product Safety IEC 60950-1 when used with Company supplied Power Supply
Environmental
Operating Temperature -10 ºC to 55 ºC
Maximum Humidity
Shock
Storage
Altitude 4600 meters, operating and non-operating
Size and Weight
Size
Weight