Initial PC Mode Settings PC Menu Components Main Menu Settings
To use the PC mode, set the resolution on the PC to 1280 x 768 @ 60Hz / 1360 x 768 @ 60Hz, and connect it to the LCD TV (supports up to 1600 x 1200 @ 60Hz/1280 x 1024 @ 85Hz). 1 Connect the LCD TV and the PC, and press the button. 2 Press the button on the remote control. The ‘MAIN SOURCE’ screen will be displayed. 3 Check the type of cable that connects the LCD TV and the PC. Press the < > button on the remote control to navigate to RGB (or DVI), and press the button.
PC Mode Environment Settings Initial PC Mode Settings 3-3
The Main menu has 5 categories, which contain submenus and option items. Switch to the ‘PC’ mode and press the
PC Mode Environment Settings Main Menu Sub Menu 1 Sub Menu 2 Sub Menu 3 Description SET UP Language English, Deutsch, Français, Español, Italiano, Korean (Menu Screen Display Language Selection.) Transparency 0~10 Adjusts the image transparency. ISM Method Normal Normal screen Orbit Moves the screen up, down, left and right in small increments to prevent overheating of the panel during prolonged use. White Sets the whole screen to white.
PC Mode Environment Settings 3-6 Main Menu Sub Menu 1 SCREEN Auto-Configure To Start Automatic adjustment of the screen/Auto in pogress. H-Position 0~100 Horizontal screen position adjustment. V-Position 0~100 Vertical screen position adjustment. Clock 0~100 Picture quality adjustment by fine-tuning. Phase 0~255 Screen phase adjustment (adjustment for screen noise, focus when letters appear to overlap each other, brightness, stability, ect.).
PC Mode Environment Settings PC Menu Components 3-7
PICTURE Menu Settings 3-8 1 Switch to the ‘PC’ mode, press the
PC Mode Environment Settings 3 When selection is complete, press the button on the remote control. 4 Press the < > button on the remote control to navigate to the ‘Brightness, Contrast’ submenu in order to adjust brightness and contrast. 5 When adjustment is complete, press the button on the remote control, and press the
PC Mode Environment Settings SCREEN Menu Settings 1 Switch to the ‘PC’ mode, press the
PC Mode Environment Settings 3 Press the < > button and the < > button on the remote control to adjust the submenus ‘H-Position’, ‘V-Position’, ‘Clock’, ‘Phase’, etc. ● H-Position : Adjusts horizontal screen position. ● V-Position : Adjusts vertical screen position. ● Clock : Adjusts the picture quality by fine tuning the screen. ● Phase : Adjusts the screen phase (adjustment for screen noise, focus when letters appear to overlap each other, brightness, stability, etc.).
Appendix
Specifications 37″ Panel In/Out Panel Type 37″Wide TFT Colour LCD Display Area 819.6 mm×460.8 mm (37.02 inch(940.3 mm) diagonal) Display Color (8bit) 16.7 million Pixel Pitch Recommended Resolution 0.2 mm×0.6 mm×RGB 1366×768 Contrast Ratio 600 (typical) Luminance white 500 cd/m2 (Center 1 point Typ.
Appendix Screen Control True Colour On Screen Display Menu, Bit Map Remote Controller Yes Dimension 1086(W)×304(D)×640(H)mm : (Speaker, Stand) included 42.75(W)×11.96(D)×25.19(H)inch Weight Net 29.7kg/65.47pounds Gross 36.6kg/80.68pounds 42″ Panel In/Out Panel Type 42″Wide TFT Colour LCD Display Area 930.25 mm×523.01 mm (42.02 inch (1067.308 mm) diagonal) Display Color 16.7 million, 8 bit Pixel Pitch Recommended Resolution 0.227 mm×0.
Appendix Speaker 10 watts ×2 Size 19(W)×11.5(D)×68(H)cm 7.48(W)×4.52(D)×26.77(H)inch Weight 2.5kg/5.5pounds(gross) Plug & Play DDC 1/2 B Screen Control True Colour On Screen Display Menu, Bit Map Remote Controller Yes Dimension 1221(W)×304(D)×731(H)mm : (Speaker, Stand) included 48.07(W)×11.96(D)×28.77(H)inch Weight Net 33.0kg/72.75pounds Gross 41.5kg/91.
Appendix Display Modes If the signal from the system is equal to the standard signal mode, the TV is adjusted automatically. If the signal from the system does not equal the standard signal mode, adjust the mode by referring to the Video card user guide, because the TV might not display or the power LED only might be on. For the display modes listed below, the screen image has been optimized initially. H V Pixel Frequency (KHz) Frequency (Hz) Frequency(MHz) Section Resolution PC 640×400 37.861 85.
Appendix Check before calling for service Please check the following before asking the service center about any problems with your LCD TV. Something seems to be wrong with the TV Symptoms What to do ● The TV does not turn on. Check the power cable connection and press the button on the remote control. ● The TV is making strange noises, but there is no video or audio. The TV may be in external input mode. Press the button on the remote control. ● There is video but no audio.
Appendix Symptoms What to do ● The picture shakes, lines appear, and audio is unstable. Check whether the TV signal is receiving interference from other radio waves or devices. Check whether the TV signal is receiving interference from automobiles, highvoltage cables, airplanes, neon signboards and so on. Change the antenna direction if necessary. ● The remote controller does not work. Check whether the batteries are dead or installed incorrectly.
Appendix Symptoms ● When playing a DVD, there is no video. What to do Check the video cable connection between the DVD and TV. Check whether there is a problem with the DVD title. Check whether the external input signal matches the DVD output signal. ● When playing VCR, there is noise on the screen. Use the screen adjustment button on the VCR to make adjustments. Check whether the video tape is in good condition. A-8 ● Some channels cannot be received. Ensure that your channel selection is correct.
Appendix Troubleshooting If you have a problem setting up or using your LCD TV, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. What you see... ‘No Signal’ message Suggested Actions Reference ● Ensure that the signal cable is firmly connceted to the PC or video sources. ● Ensure that the PC or video sources are turned on. Page 1-18 ~ 1-26 ● Check the maximum resolution and the frequency of the video adaptor.
