User's Manual

Watching TV

Watching Digital TV

To configure the menu

To Configure TV Channels

To Select TV/External Input

Adjusting the Picture

Adjusting the Sound

Configuring the PIP/POP/PBP Functions

To Configure the SET UP

External Control Device Setup

PAGE 1
Watching TV Watching Digital TV To configure the menu To Configure TV Channels To Select TV/External Input Adjusting the Picture Adjusting the Sound Configuring the PIP/POP/PBP Functions To Configure the SET UP External Control Device Setup
PAGE 2
-2 1 Check the antenna connection. (For more information on connection, see section ‘1.4 Connecting the LCD TV and Peripheral Devices’.) 2 Press the power button on the rear panel of the LCD TV. 3 Press the button on the remote control. 4 Press the button on the remote control, and press the number button to select a channel (For example, if selecting channel no. 99, press the 9 button twice on the remote control). 5 Press the < Watching TV > button to adjust the volume.
PAGE 3
Using the LCD TV N O T E ▶ To mute the LCD TV sound Press the button on the remote control once to mute the LCD TV sound. Press the button once again to turn the sound back on. ▶ To completely turn off the LCD TV power. ❶ Press the button on the remote control. The LCD TV will be turned off and remain in standby mode. ❷ Press the power button on the rear panel of the LCD TV (or unplug the power cord from the wall outlet).