User's Manual

LCD TV Overview and Installation
Connecting a DVD Player & Set-Top Box (Connecting to Y, Pb, Pr)
Connect a set of audio cables between the component AUDIO IN jacks of the LCD
Display and the AUDIO OUT jacks of the DVD Player.
1
Connect video cables between the Y, Pb and Pr inputs on the LCD Display and the Y, Pb
and Pr outputs on the DVD Player.
2
Turn on the TV power, and press the <SOURCE> button on the remote control to select the
DVD mode (component).
3
Turn on the DVD Player power or Set-Top Box power to view high quality video.
4
N󳢯 O󳢯 T󳢯 E 󳢯 S
▶▶
Connecting VCR (when connecting to the antenna input connector)
Different jacks on the rear panel are used for different external devices.
❶ Connect the external antenna cable to the VCR.
❷ Connect the 75 Ω coaxial cable to the VCR and TV.
❸ Set the channel selection switch on the rear panel of the VCR to channel 3 or 4, and turn on the VCR
power.
❹ Turn on the TV power and switch the channel to the same channel that was set on the VCR (3 or 4).
❺ Insert a video tape into the VCR, and press the <PLAY> button.
VCR
75Ω coaxial cable
External Antenna
1-22
Connecting the LCD TV and Peripheral Devices