Watching TV To configure the menu To Configure TV Channels To Select TV/External Input Adjusting the Picture Adjusting the Sound Configuring the PIP/POP/PBP Functions To Configure the SET UP External Control Device Setup
-2 1 Check the antenna connection. (For more information on connection, see ‘1.4 Connecting the LCD TV and Peripheral Devices’.) 2 Press the power button on the rear panel of the LCD TV. 3 Press the button on the remote control. 4 Press the button on the remote control, and press the number button to select a channel (For example, if selecting channel no. 99, press the 9 button twice on the remote control). 5 Press the < Watching TV > button to adjust the volume.
Using the LCD TV N O T E ▶ To mute the LCD TV sound Press the button on the remote control once to mute the LCD TV sound. Press the button once again to turn the sound back on. ▶ To completely turn off the LCD TV power. ❶ Press the button on the remote control. The LCD TV will be turned off and remain in standby mode. ❷ Press the power button on the rear panel of the LCD TV (or unplug the power cord from the wall outlet).
To configure the LCD TV functions, press the [MENU] button. Knowing the method for configuring the menu will make using the LCD TV much easier. Menu Settings 1 Press the power button on the rear panel of the LCD TV, and press the button on the remote control. 2 Press the
Using the LCD TV 3 Press the button or the < > button on the remote control to select the menu to configure. Submenus will be available for each selection. 4 In the submenus, use the < > button on the remote control to navigate to different items. Use the < > button to make adjustments. When selecting PIP Source, use the < > button to make adjustments, and then press the button on the remote control to make a selection (Select the ‘User’ item under the 'PSM’ submenu).
Using the LCD TV 5 Use the < > button and the < > button on the remote control to adjust the settings for different items. (For example, adjustment can be made of items such as Brightness, Contrast, Color, Sharpness, and Tint.) 6 When adjustments are complete, press the button once to close the adjustment screen. Press the
Using the LCD TV TV Menu Categories and Items The Main Menu contains 5 categories, which in turn contain submenus and option items: Main Menu PICTURE Sub Menu 1 Sub Menu 2 Sub Menu 3 PSM Dynamic Vivid Picture Appearance (Select Screen View) Standard Standard Picture Appearance Mild Softer Picture Appearance Game Select when playing video games on LCD TV User Brightness : Adjust brightness. (Brightness means the brightness of the screen.) Contrast : Adjust contrast.
Using the LCD TV Main Menu PIP/POP/PBP Sub Menu 1 Sub Menu 2 Sub Menu 3 On/Off Off PIP/POP/PBP Function Off Description PIP Source TV, AV1~AV3, Component1~2, RGB, DVI POP Swap To Set PIP Size Small, Large PIP Position PIP Screen Position Selection Source TV, AV1~AV3, Component1~2, RGB, DVI PBP1~2 SET UP Language Swap To Set Source TV, AV1~AV3, Component1~2, RGB, DVI Swap To Set English, Deutsch, Français, Español, Italiano, Korean (Menu Screen Display Language Selection) Transpa
Using the LCD TV Main Menu CHANNEL Sub Menu 1 Sub Menu 2 Air/CATV Scan by broadcasting method Auto CH Progress Automatic channel scan Channel Scans the TV channels and registers the channels on air Add/Del Channel Saves the selected channels Fine Tune Manually fine tune the channels if the channel reception is not good To configure the menu 2-9
To watch TV with the LCD TV, configure the channels. (Always check the TV connection before use.) To save TV channels, configure the channels during the broadcasting hours. Use Automatic Channel Scanning to save all the channels currently airing. Setting channels automatically 2-10 1 Press the
Using the LCD TV 3 Press the < > button on the remote control to move to the ‘Auto CH Progress’ submenu. At the ‘Auto CH Progress’ item, press the < > button on the remote control to run ‘To Start’. Channels will be scanned and saved automatically. 4 Press the
Using the LCD TV 2-12 2 Press the < > button on the remote control to move to the ‘Channel’ submenu, and press the < > button to select the channel with the best video quality from the channels found. 3 Press the < > button on the remote control to move to the ‘Add/Del Channe’ submenu. Press the < > button on the remote control to select ‘Add’ and press the button. 4 Press the
Using the LCD TV To Configure TV Channels 2-13
An external input signal connected to the LCD TV can be selected for viewing. (VCR, DVD, Camcorder, etc.) Selecting an External Input Device Connected to the LCD TV for viewing 1 Press the button on the remote control. 2 The ‘MAIN SOURCE’ screen will be displayed. Press the < > button on the remote control to select the external device connected to the LCD TV, and press the button. 3 LCD TV screen will be displayed when you play the external input device.
Using the LCD TV 2 Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu, and press the < > button to navigate to the ‘On/Off’ submenu. 3 Press the < > button on the remote control. Option items will be displayed according to the items ‘PIP, POP, PBP1, and PBP2’. 4 Configure settings for each of the items PIP, POP, PBP1, and PBP2. Select the external input device connected to the LCD TV and configure the appropriate option item (PIP/POP/PBP).
Using the LCD TV 2-16 Using POP Mode LCD TV Screen Using PBP1 Mode LCD TV Screen Using PBP2 Mode LCD TV Screen To Select TV/External Input
Using the LCD TV 5 When option configuration for each item is complete, press the button on the remote control. 6 To swap between the main screen and the sub-screen when in PIP, POP, or PBP mode, press the button on the remote control.
The LCD TV has been configured with optimal contrast, brightness, sharpness, colors, etc. by factory default, and there is no need for any further user configuration. However, if you wish to adjust the picture settings, follow the instructions below. 1 Press the
Using the LCD TV - Brightness : Adjust brightness. (Brightness means the brightness of the screen.) - Contrast : Adjust contrast. (Contrast means the difference in brightness between an object and its background.) - Color : Adjust color (RGB). (Adjusting the color to make it look more natural.) - Sharpness : Adjust sharpness. (Sharpness means the sharpness of the object's profile.) - Tint : Adjust color intensity. (Color intensity indicates color depth.
1 Press the
Using the LCD TV ● Bass : Adjusts bass ● Treble : Adjusts treble 4 Press the < > button on the remote control to navigate to the ‘Surround’ submenu. Press the < > button on the remote control to select options provided in ‘Surround’. When configuration is complete, press the button. - Off : Select this if not using the Surround output function. - Normal : Surround sound optimized to the output conditions will be used. - Special : Enhances the surround output.
Using the LCD TV 2-22 5 Press the < > button on the remote control to navigate to the ‘AVL’ submenu. Press the < > button on the remote control to select whether to use the ‘AVL’ function. When selection is complete, press the button. 6 Press the < > button on the remote control to navigate to the ‘Balance’ submenu. Press the < > button on the remote control to adjust ‘Left and Right Speaker Sound Balance’. When adjustment is complete, press the button.
Using the LCD TV Adjusting the Sound 2-23
Two channels can be shown on the TV screen simultaneously. Available screen division methods are PIP (Picture in a Picture), POP (Picture on a Picture), and PBP (Picture by a Picture). PIP Function Settings 1 Press the
Using the LCD TV POP Function Settings 1 Press the
Using the LCD TV 3 Press the < > button on the remote controller to navigate to the ‘On/Off’ submenu. Press the < > button on the remote controller to select ‘PBP1 or PBP2’. When configuration is complete, press the button. ● Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI). ● Swap : Swap between the main screen and the sub-screen (To Set). 4 2-26 When configuration is complete, press the
Using the LCD TV Configuring the PIP/POP/PBP Functions 2-27
Various functions for watching TV can be configured. (Language, Transparency, ARC, ISM Method, Timer, Caption, Parental etc.) Selecting the Main Screen Language 1 Press the
Using the LCD TV 3 Press the < > button on the remote control to navigate to the ‘Transparency’ submenu. Press the < > button on the remote control to adjust the Image Transparency. When adjustment is complete, press the button (the settings possible are 0~10). 4 When configuration is complete, press the
Using the LCD TV 4 Press the < 5 Press the < > button on the remote control to navigate to the ‘ARC’ submenu. Press the < > button on the remote control to select Screen Aspect. When selection is complete, press the button (16:9, 14:9 or 4:3). > button on the remote control to navigate to the ‘SET UP’ menu. <16:9> <14:9> <4:3> Supported Only When the PIP/POP/PBP mode is Set to OFF 6 When configuration is complete, press the
Using the LCD TV 3 Press the < press the < displayed. 4 Under ‘Clock’, press the < > button and the < > button on the remote control to set the current time. (When setting time, press the < > button on the remote control to set ‘Hour’, press the < > button to move to’Minutes’, press the < > button to set ‘Minutes’, press the < > button to move to ‘AM/PM’, and press the < > button to select ‘AM/PM’.
Using the LCD TV Viewing Closed Captions The LCD TV can decodes and displays the closed caption that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the colsed caption signal from television program, so home-recorded video tapes also provide closed captions. Most prerecorded commercial video tapes provide closed captions as well.
Using the LCD TV N O T E S ▶ In Caption mode, captions appear at the bottom of the screen, and they usually cover only a small portion of the picture. ▶ In TEXT mode, information is not related to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. ▶ Depending on the particular broadcast, it might be necessary to make changes to Channel and Field. 5 When you have finished, press the
Using the LCD TV 3 Press the < 4 Press the < > button on the remote control to navigate to the ‘Parental’ submenu. > button. The ‘Enter the Password : ----’ screen is displayed. 5 Enter 4-digit PIN number. N O T E ▶ The default PIN number for a new set is ‘1-1-1-1’.
Using the LCD TV 6 After entering a valid PIN number, the ‘Parental’ menu screen will appear. Press the < > buttons to select ‘Set Password’. 7 When you have finished, press the
Using the LCD TV 4 Press the < > button. The ‘Enter the Password : ----’ screen is displayed. 5 Enter 4-digit PIN number. 6 After entering a valid PIN number, the Parental menu is displayed and the Parental Lock will be highlighted. To On or Off the Parental feature, press the < Lock On/Off. > buttons to select Parental 7 When you have finished, press the
Using the LCD TV 4 Press the < > button. The ‘Enter the Password : ----’ screen is displayed. 5 Enter 4-digit PIN number. 6 After entering a valid PIN number, the Parental sub menu screen will appear. Press the < 7 Press the < The < > buttons to move to ‘MPAA’ sub menu. > buttons to select particular MPAA category. > buttons will cycle through the MPAA categories. - G & Above : General audience (no restrictions). - PG & Above : Parental guidance suggested.
Using the LCD TV How to Setup Restriction Using the TV Guidelines 1 Press the
Using the LCD TV For example, if you block TV-Y category, then TV-Y7 will be automatically blocked. Similarly, if you block TV-G category, then all the categories in the ‘young adult’ will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (FV, V, S, L, D) work together similarly. (See step 8) 8 To set the FV, D, L, S and V sub-ratings, first select one of these TV-Ratings : TV-Y7, TV-PG, TV-14 and TV-MA (See step 7). Next, while the TV-Ratings is selected, repeatedly press the < > button.
1 Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor’s functions externally. 2 Connect the serial port of the control device to the RS-232C jack on the Monitor back panel. 3 RS-232C connection cables are not supplied with the Monitor. N O T E ▶ Type of Connector : D-Sub 9-pin Male No.
Using the LCD TV N O T E ▶ RS-232C Configurations 7-Wire Configuration (Standard RS-232C cable) 3-Wire Configuration (Not standard) Set ID - Use this function to specify a monitor ID number. - Refer to ‘Real Data Mapping 1’. 1 Press the
Using the LCD TV Command Reference List COMMAND 1 COMMAND 2 DATA(Hexadecimal) k a 0~1 k b 0~7 k e 0~1 k f 0 ~ 64 k g 0 ~ 64 k h 0 ~ 64 k i 0 ~ 64 k j 0 ~ 64 k k 0 ~ 64 k n 0~4 k q 0~3 k r 0 ~ 14 k s 0 ~ 14 k t 0 ~ 64 k u 0~3 k v 0 ~ C8 k w 0 ~ C8 k $ 0 ~ C8 k y 0~7 Power Input Select Volume Mute Volume Control Contrast Brightness Color Tint Sharpness PIP/POP/PBP PIP Position Treble Bass Balance Color Temperature Red Adjustment Green Adjustment Blu
Using the LCD TV N O T E ▶ Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : k, [Command 2] : To control LCD set. [Set ID] : You can adjust the set ID to choose desired moni-tor ID number in Special menu. Adjustment range is 0 ~ 99. When selecting Set ID ‘0’, every connected LCD set is controlled. Set ID is indicated as decimal (0~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol. [DATA] : To transmit command data.
Using the LCD TV ● To show Power On/Off. - Transmission [k][a][ ][Set ID][ ][FF][Cr] Data 0 : Power Off 1 : Power On - Acknowledgement [a][ ][Set ID][ ][OK][Data][x] In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. Input Select (Command2 : b) (Main Picture Input) ● To select input source for the Monitor. You can also select an input source using the INPUTSELECT button on the Monitor’s remote control.
Using the LCD TV Volume Control (Command2 : f) ● To adjust volume. You can also adjust volume with the volume buttons on remote control. - Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping1’ as shown below. - Acknowledgement [f][ ][Set ID][ ][OK][Data][x] Contrast (Command2 : g) ● To adjust screen contrast. You can also adjust contrast in the Video menu.
Using the LCD TV Color (Command2 : i) ● To adjust the screen color. You can also adjust color in the Video menu. - Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping 1’. - Acknowledgement [i][ ][Set ID][ ][OK][Data][x] Tint (Command2 : j) ● To adjust the screen tint. You can also adjust tint in the Video menu. - Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 ~ Green : 64 Refer to ‘Real data mapping 1’.
Using the LCD TV PIP/POP/PBP (Command2 : n) ● To control the PIP (Picture-in-Picture) or Twin Picture. You can also control the PIP/Twin picture mode using the PIP or TWIN PICTURE button on the remote control or in the Twin menu. - Transmission [k][n][ ][Set ID][ ][Data][Cr] Data 0 : PIP OFF 2 : POP 1 : PIP 3 : PBP1 4 : PBP2 - Acknowledgement [n][ ][Set ID][ ][OK][Data][x] PIP Position (Command2 : q) ● To select sub picture position for PIP. You can also adjust the sub picture position using Win.
Using the LCD TV Bass (Command2 : s) ● To adjust bass. You can also adjust bass in the Audio menu. - Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 Refer to ‘Real data mapping 1’. - Acknowledgement [s][ ][Set ID][ ][OK][Data][x] (Operates only when SSM is set to USER.) Balance (Command2 : t) ● To adjust balance. You can also adjust balance in the Audio menu. - Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 Refer to ‘Real data mapping 1’.
Using the LCD TV Red Adjustment (Command2 : v) ● To adjust red in color temperature.(Operates only when CSM is set to USER.) - Transmission [k][v][ ][Set ID][ ][Data][Cr] Data 0 ~ FF - Acknowledgement [v][ ][Set ID][ ][OK][Data][x] Green Adjustment (Command2 : w) ● To adjust green in color temperature.(Operates only when CSM is set to USER.
