User's Manual

2-24
Configuring the PIP/POP/PBP Functions
Two channels can be shown on the TV screen simultaneously. Available screen
division methods are PIP (Picture in a Picture), POP (Picture on a Picture), and
PBP (Picture by a Picture).
PIP Function Settings
Press the <MENU> button on the remote control.
1
Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.
2
Press the < > button on the remote control to navigate to the ‘On/Off’ submenu.
Press the < > button on the remote control to select ‘PIP’. When configuration is
complete, press the <OK> button.
● Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).
● Swap : Swap between the main screen and the sub-screen (To Set).
● PIP size : Select the PIP screen size (Small or Large).
● PIP position : Select the PIP screen position.
3
When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.
4