User's Manual

2-40
External Control Device Setup
Connect the RS-232C input jack to an external control device (such as a computer or an A/V
control system) and control the Monitor’s functions externally.
1
Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
2
RS-232C connection cables are not supplied with the Monitor.
3
N󳢯 O󳢯 T󳢯 E
▶▶
Type of Connector : D-Sub 9-pin Male
No. Pin Name
1
2
3
4
5
6
7
8
9
No Connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection