User's Manual

2-41
External Control Device Setup
Using the LCD TV
N󳢯 O󳢯 T󳢯 E
▶▶
RS-232C Configurations
7-Wire Configuration
(Standard RS-232C cable)
3-Wire Configuration
(Not standard)
Press the <MENU> button and then use the ▲/▼ button to select the SPECIAL menu.
1
Press the ▶ button and then use ▲/▼ button to select Set ID.
2
Press the ▶ button and then use ◀/▶ button to adjust Set ID.to choose the desired
monitor ID number.
• The adjustment range of Set ID. is 0 ~ 99.
3
Set ID
- Use this function to specify a monitor ID number.
- Refer to ‘Real Data Mapping 1’.
Communication Parameters
- Baud rate : 9600 bps (UART)
- Data length : 8 bits
- Parity : None
- Stop bit : 1 bit
- Communication code : ASCII code