Initial PC Mode Settings PC Menu Components Main Menu Settings
To use the PC mode, set the resolution on the PC to 1280 x 768 @ 60Hz / 1360 x 768 @ 60Hz, and connect it to the LCD TV (supports up to 1600 x 1200 @ 60Hz/1280 x 1024 @ 85). 1 Connect the LCD TV and the PC, and press the button. 2 Press the button on the remote control. The ‘MAIN SOURCE’ screen will be displayed. 3 Check the type of cable that connects the LCD TV and the PC. Press the < > button on the remote control to navigate to RGB (or DVI), and press the button.
PC Mode Environment Settings Initial PC Mode Settings 3-3
The Main menu has 5 categories, which contain submenus and option items. Switch to the ‘PC’ mode and press the
PC Mode Environment Settings Main Menu PIP/POP/PBP Sub Menu 1 Sub Menu 2 Sub Menu 3 On/Off Off PIP/POP/PBP Function Off Description PIP Source TV, AV1~AV3, Component1~2, RGB, DVI POP Swap To Set PIP Size Small, Large PIP Position PIP Screen Position Selection Source TV, AV1~AV3, Component1~2, RGB, DVI PBP1~2 Swap To Set Source TV, AV1~AV3, Component1~2, RGB, DVI Swap SET UP Language To Set English, Deutsch, Français, Español, Italiano, Korean (Menu Screen Display Language Selec
PICTURE Menu Settings 3-6 1 Switch to the ‘PC’ mode, press the
PC Mode Environment Settings 3 When selection is complete, press the button on the remote control. 4 Press the < > button on the remote control to navigate to the ‘Brightness, Contrast’ submenu in order to adjust brightness and contrast. 5 When adjustment is complete, press the button on the remote control, and press the
PC Mode Environment Settings SCREEN Menu Settings 3-8 1 Switch to the ‘PC’ mode, press the
PC Mode Environment Settings 3 Press the < > button and the < > button on the remote control to adjust the submenus ‘H-Position’, ‘V-Position’, ‘Clock’, ‘Phase’, etc. ● H-Position : Adjusts horizontal screen position. ● V-Position : Adjusts vertical screen position. ● Clock : Adjusts the picture quality by fine tuning the screen. ● Phase : Adjusts the screen phase (adjustment for screen noise, focus when letters appear to overlap each other, brightness, stability, etc.).
Appendix
Specifications 37 Panel In/Out Panel Type 37 Wide TFT Colour LCD Display Area 819.6 mm 460.8 mm Display Colour (8bit) 16.7 million Pixel Pitch Recommended Resolution 0.2 mm 0.
Appendix Remote Controller Yes Dimension 1086(W) x 304(D) x 640(H) : Speaker (stand included) 42 Panel In/Out Panel Type 42 Wide TFT Colour LCD Display Area 930.25 mm 523.01 mm Display Colour 16.7 million, 8 bit Pixel Pitch Recommended Resolution 0.227 mm 0.681 mm RGB 1366 768 Contrast Ratio 300(Min), 400(Typ.
Appendix Display Modes If the signal from the system is equal to the standard signal mode, the TV is adjusted automatically. If the signal from the system does not equal the standard signal mode, adjust the mode by referring to the Video card user guide, because the TV might not display or the power LED only might be on. For the display modes listed below, the screen image has been optimized initially.
Appendix Check before calling for service Please check the following before asking the service center about any problems with your LCD TV. Something seems to be wrong with the TV Symptoms What to do ● The TV does not go on. Check the power cable connection and press the button on the remote controller. ● The TV is making strange noises, but there is no video or audio. The TV may be in external input mode. Press the button on the remote controller. ● There is video but no audio.
Appendix Symptoms What to do ● The picture shakes, lines appear, and audio is unstable. Check whether the TV signal is receiving interference from other radio waves or devices. Check whether the TV signal is receiving interference from automobiles, highvoltage cables, airplanes, neon signboards and so on. Change the antenna direction if necessary. ● The remote controller does not work. Check whether the batteries are dead or installed incorrectly.
Appendix Symptoms ● When playing a DVD, there is no video. What to do Check the video cable connection between the DVD and TV. Check whether there is a problem with the DVD title. Check whether the external input signal matches the DVD output signal. ● When playing VCR, there is noise on the screen. Use the screen adjustment button on the VCR to make adjustments. Check whether the video tape is in good condition. ● Some channels cannot be received. Ensure that your channel selection is correct.
Appendix Troubleshooting If you have a problem setting up or using your LCD TV, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. What you see... Suggested Actions Ensure that the signal cable is firmly connceted to the PC or video sources. Ensure that the PC or video sources are turned on.
