Owner manual

ManualsBrandsAtec ManualsEquipmentChroma-19032

MODEL 19032/19032-P

Electrical Safety Analyzer

Key Features :

■ AC/DC/IR/GB/LC five instruments in one

■ Function test up to 20A

■ Programmable voltage output and limit

value

■ OSC open/short check

■ Flashover detection

■ Human protection circuit

■ Multi-scan device support dynamic leakage

current test

■ Standard RS232 interface

■ Optional GPIB interface

■ Large LCD panel

■ Front panel lockout function

■ Support PC software

■ UL/TUV/CE

Key Features 19032-P :

■ 500VA output

■ Floating output , compliance with EN50191

■ USB interface, compatible with USB TMC

■ GFI human body protection circuit

■ CE certification (only)

General Electrical Safety Testing Solution

Electrical safety testing is one of the major

item in the electrical product quality tests.

All electrical products consisting of adapter,

SMPS, charger, house appliance, information

technology product and video product are

required to perform electrical safety tests.

The 19032 series combines Hi-Pot, IR, GB,

LC/ALC/DLC and Dynamic Function Test. That

can save 50% of production line space without

purchasing several Hi-Pot testers , 19032 is

able to increase efficiency of electrical safety

test during manufacturing and reduce the risk

on testing.

Open/Short Check (OSC)

Patent No. : 254135

All manufacturers have to solve the problems of

error connections and unconnected test cables

caused by the production line testers.Chroma

19032 equipp with the up-to-date open/short

check function (OSC) for product testing.It can

free the tests from such problem.

Twinport

Function

USA Patent No.: US6504381

The key factor affecting the efficiency of

manufacturing is the efficiency for electrical

safety test. Twinport function can lower the time

for safety test, and safety workstation will no

longer be a bottleneck in production line.

Product Application

The 190 32 c an b e a pp lie d t o v er sa til e

tests of electrical products which include

quality assurance sampling inspection test,

manufacturing test and development validation.

• Power cord

• Adapter, SMPS

• House appliance

• Information technology product

• Medical equipment

• Lab/testing equipment

• EMI FILTER

EN50191 Floating Output Function

The leakage current of any ground terminal

should be lower than 3.5mA when operating

Floating output function. Therefore, the

operator who near to potential ground terminal

can avoid electrical hazard.

ELECTRICAL SAFETY ANALYZER

MODEL 19032/19032-P

Summary of content (8 pages)

PAGE 1
Electrical Safety Analyzer MODEL 19032/19032-P Key Features : ■ AC/DC/IR/GB/LC five instruments in one ■ Function test up to 20A ■ Programmable voltage output and limit value ■ OSC open/short check ■ Flashover detection ■ Human protection circuit ■ Multi-scan device support dynamic leakage current test ■ Standard RS232 interface ■ Optional GPIB interface ■ Large LCD panel ■ Front panel lockout function ■ Support PC software Electrical Safety Analyzer MODEL 19032/19032-P General Electrical Safety Testing S
PAGE 2
Measurement Technology TWINPORT TM HIPOT & GROUND BOND TEST FUNCTIONS (USA PATENT NO.: US6504381) The 19032 electrical safety tester has Twinport™ Technology. This patent and unique feature are allow to test Hi-pot and ground bond simultaneously. It can Conventional Safety Analyzer reduce half of the time on testing;so it is ideal for production test. Ground Bond Hipot Ground Bond Hipot 19032 2 Sec. 2 Sec. FLASHOVER DETECTION The 19032 has Flashover Detection as other Chroma safety test series.
PAGE 3
Measurement Technology GFI HUMAN PROTECTION (19032-P) The ultimate purpose of safety testing is to protect users from electric hazard.The 19032-P also has GFI function to protect the operator. GFI function can cut off the power output immediately while human body is suffering electric shock. GFI function detects the current from Earth GND (Ioperator) and LOW terminal (Idevice). The voltage output will be cut off if the current is over 0.5mA.
PAGE 4
Product Application SAFETY TEST OF INFORMATION TECHNOLOGY PRODUCT (IEC 60950) In digital time, information technology is so close to our life. Desktop, C notebook, LCD monitor, UPS, printer and projector are the products that human may use at any time. To ensure the safety, all products should IC do electrical safety test. The 19032 offers all functions of safety tests and Normal/Reverse as well as Single Fault switch function (LC Test) to reduce the load of manufacturing personnel.
PAGE 5
Product Application SAFETY TEST OF VIDEO PRODUCT (IEC 60065) Video products are inclusive of DVD recorder, LCD TV, audio amplifier, stereo and etc. These products have mass power output with separate safety standards. The main circuit design of mass power is signal output terminal beside temperature increasing and heat dissipation of electronic component. Open voltage of some video products is over 35Vac peak or 60Vdc peak that performs U1 dynamic leakage current test is required.
PAGE 6
Option LEAKAGE CURRENT SCANNER Different safety standards have various leakage current requirements which include test method and max. current output. Chroma 19032 is able to combine different scanners for safety needs. As the table list below. Option No Name A190302 A190303 A190304 9030A (Ext.
PAGE 7
Option PANEL DESCRIPTION 11 29 6 7 8 19032 1. Power Switch 30 31 32 2. LCD Display 3. Stop Key 3 4 12 1 4. Start Key 5. Cursor Keys 6. TEST Key 2 25 22 9 17 23 28 19 5 7. PRINT Key 10 13 14 15 16 26 8. SYSTEM Key 21 9. Cal-Enable (19032) 10. DATA Entry Key 11. Function Key 12. HV Output 13. DRIVE+ 27 18 24 14. SENSE+ 20 15. SENSE16. DRIVE17. Update Enable (19032) 19032-P 11 29 6 7 8 18. Remote I/O 30 31 32 19. Line Voltage Selector 20. Power Cord Receptacle 3 33 4 21.
PAGE 8
SPECIFICATIONS Model 19032 19032-P Mode AC/DC/IR/GB/LC Withstanding Voltage Test Output Voltage DC:0.05 ~ 6kV , AC : 0.05 ~ 5kV Load Regulation ±(1% reading +0.1% range) ±(2% reading +0.1% range) Voltage Accuracy ±(1% reading +0.1% range) ±(2% reading +0.1% range) Voltage Resolution Cutoff Current Current Resolution Current Accuracy Output Frequency 2V DC : 20mA , AC : 40mA DC : 20mA , AC : 100mA 0.1 μA DC ; 1μA AC ±(1% reading +0.1% range) ±(2% reading +0.