User guide

DATA SHEET > Transient Emission Set > 20130814

TECHNICAL DETAILS

TRANSIENT EMISSION SET - THE BENEFITS

The EM TEST Transient Emission Set consisting of the

BS 200N100 electronic switch, the artificial network

AN 200N100 and the BSM 200N40 mechanical switch is

an easy-to-use, economic and compact solution, fully

compliant to ISO 7637-2.

Small size of the equipment and short interconnections

allow to meet the distances specified by the standard.

An optional resistor box RS-Box with shunt resistor is

available for transient emission measurements as per

ISO 7637-2:2004 and ISO 7637-2:2011.

The RS-Box offers the required 40ohm shunt resistor and

other demanding shunt resistors values of e.g. 10ohm,

20ohm and 120ohm.

MULTI-PURPOSE AN 200N100

THREE-IN-ONE ARTIFICIAL NETWORK

The AN 200N100 is the multi-purpose artificial network

designed to cover four different test requirements. The

various configurations are selected by two switches. One

switch is used to configure the AN 200N100 mains input

(no capacitor as per ISO 7637-2, 1uF capacitor accross

the mains input as per CISPR 25 and ISO 11452-4 or 2uF

capacitors in series with a 1ohm resistor as per

CISPR 16-1-2). A second switch is used to switch in the

internal 50ohm termination resistor as required.

The AN 200N100 is fully adapted to the various test

requirements and shows the typical impedance

characteristics according to the different standards.