User guide

DATA SHEET > Transient Emission Set > 20130814
TECHNICAL DETAILS
BSM 200N40 - MECHANICAL SWITCH
SPECIFICATIONS
Operation voltage
DUT supply
12V/24V
Operation current Max. 40A DC continuous, resistive
load
Contact high purity silver contacts, no
suppression across relay contact,
insulated from the coil circuit
TRIGGER
Manual Manual trigger of a single event
Auto Automatic trigger with min. 0.1Hz to
max. 1Hz repetition, continuously
selectable by potentiometer
External External trigger negative going edge
0V, BNC input
Operation Indicated by LED
MEASUREMENT
Voltage monitor BNC output; divider 1:200 +/-5%
CRO trigger BNC output, negative going edge 0V
GENERAL DATA
Dimensions,
weight
90mm x 105mm x 104mm (LxWxH)
(without connecting sockets)
approx. 0.8kg
Supply voltage 24V DC via mains supply adapter
OPTIONS
OPTIONAL ACCESSORIES
CA BS 200N Calibration load 0.6ohm and 50uH
for the verification of the electronic
switch characteristic
RS-BOX Shunt resistor box with Rs = 10ohm,
20ohm, 40ohm and 120ohm
www.emtest.com © EM TEST > PAGE 4/5