User Manual

11
SMRT36
Megger Relay Test System
Description Part No.
Example Configurations
For customers in North America, Central America,
Japan, Philippines, South Korea, Taiwan, Thailand,
Venezuela, Virgin Islands, and other countries that
use standard NEMA type power outlets of 100, 110,
115 or 120 volts at 50/60 Hz. could order a unit with the
standard North American power cord. In this example
the unit is a SMRT36 three phase unit, with the extra
binary I/O and Battery Simulator, with the STVI1, without
grounded common returns, no Bluetooth, no IEC61850,
with the standard hardware, and with test leads.
The style
number
would be,
SMRT36 –
30P1F0A0S1
For customers in Austria, Belgium, Finland, France,
Germany, the Netherlands, Norway, Portugal, Spain,
Sweden, Turkey, and other countries where the CEE 7
standard connector is used could order a unit with the
Continental European Power Cord with CEE 7/7 Schuko
plug. In this example the unit is a 3 phase unit, with the
extra binary I/O and Battery Simulator, without the STVI1,
with floating outputs, no Bluetooth, with IEC61850
enabled, with the standard hardware, and with test leads.
The style
number
would be,
SMRT36-
30P0F0E1S1
For customers in United Kingdom, Ireland, Anguilla,
Cyprus, Dominica, Gambia, Gibraltar, Malta,
Malaysia, Malawi, St. Lucia, St. Vincent, Zambia,
and other countries where the UK standard connector is
used could order a unit with the UK Power Cord. In this
example the unit is a 3 channel unit, with the extra binary
I/O and Battery Simulator, with the STVI-1, CE Marked
220-230 V input and floating commons, no Bluetooth,
with IEC61850 enabled, with standard hardware, and with
test leads.
The style
number
would be,
SMRT36-
30P1C0U1S1
The final example is for countries that have more unique
power connectors, which will require international color
coded wires ready for appropriate male connectors to
be installed like; Australia/New Zealand, Argentina,
China, Demark, India, South Africa, Ireland, Israel,
Russia, Switzerland, or the United Kingdom. These
countries are more likely to order the unit with the
international color coded power cord ready for mounting
the appropriate male connector. In this example the unit
is a 3 phase unit, with the extra binary I/O and Battery
Simulator, with the STVI1, with the floating outputs, with
Bluetooth, with IEC61850 enabled, with the standard
hardware, and with test leads.
The style
number
would be,
SMRT36 –
30P1F1I1S1
Description Part No.
STATES
®
10 Pole Test Paddle: Use with STATES FMS Test Switch or ABB
FT-1 10 pole Test Switch.
Test paddle features knobs which also serve as insulated Ø
4 mm rigid socket accepting spring loaded Ø 4 mm plugs
with rigged insulating sleeve, or retractable sleeve. Use
with test leads up to 600 V, 32 Amperes CATII.
V1TP10
STATES
®
10 Pole Test Paddle Attachment: Use with STATES V1TP10
Test Paddle.
Test paddle attachment provides an additional 10
insulated connection points for front connection, as well
as the standard top connections for test leads. Adapter
can provide convenient parallel test connections of test
currents to two terminals at one time. Use with test leads
up to 600 V, 32 Amperes CAT II.
TPA10
Transit Case
Hard-Sided Transit Case: Includes custom designed foam inserts for the
SMRT unit and accessory case. Transit case includes retractable handle,
polyurethane wheels with stainless steel bearings, double-throw latches,
fold-down handles, and stainless steel hardware and padlock protection,
with O-ring seal making the case water-tight, with an IP 67 rating. Tested
and certified to US Department of Defense Standards for impact, vibration,
and low/high storage temperatures. The case is small, and weighs only 25
pounds (11.25 kg). With a three channel SMRT 36 it is light enough to
check as luggage on commercial airliners.
Rugged, hard-sided transit case (1ea).
1001-632