User Manual

8
SMRT36
Megger Relay Test System
DESCRIPTION
Included Standard Accessories Part Number
Power Cord - Depending on the style number, the unit will come with one of the following,
Line cord, North American 620000
Line cord, Continental Europe with CEE 7/7 Schuko Plug 50425
Line cord, International color coded wire 15065
Line cord, United Kingdom 90002-989
Ethernet cable for interconnection to PC, 210cm (7 ft.) long (Qty. 1 ea) 90003-684
Instruction manual CD 80989
Hardware Options: S for Standard hardware. T for Transducer
enabled.
Test Leads Option: Enter the number 1 for the unit to come with
Test Leads. Enter 0 for the unit without Test Leads.
Optional Accessories Descriptions
STVI, or
Binary I/O
Bat SIM, or
Test Leads
Options
One (1)
Voltage
Current
Module
Two (2)
Voltage
Current
Modules
Three (3)
Voltage
Current
Modules
Binary I/O,
Battery
Simulator
Option
Accessory Carry Case: Use to carry power cord, Ethernet
cable, Optional STVI and test leads.
Qty. 1 ea.
Part No.
2001-487
Sleeved Pair of Test Leads: Keeps the test leads in pairs
and from getting entangled.
Sleeved Test Leads, one red, one black, 200 cm (78.7”)
long, 600 V, 32 Amperes CAT II.
Qty. 3 pr.
Part No.
2001-394
Qty. 6 pr.
Part No.
2001-394
Qty. 2 pr.
Part No.
2001-394
Qty. 3 pr.
Part No.
2001-394
Cable/Spade Lug Adapter (Small): Small lug fit most new
relay small terminal blocks.
Lug adapter, red, 4.1 mm, use with test leads up to 1000
V/ 20 Amps CAT II.
Qty. 3 ea.
Part No.
684004
Qty. 6 ea.
Part No.
684004
Qty. 12ea.
Part No.
684004
Qty. 3 ea.
Part No.
684004
Lug adapter, black, 4.1 mm, use with test leads up to 1000
V/ 20 Amps CAT II.
Qty. 3 ea.
Part
Number
684005
Qty. 6 ea.
Part
Number
684005
Qty. 12ea.
Part
Number
684005
Qty. 3 ea.
Part
Number
684005
Jumper Lead: Used to common returns together on units
with floating ground returns, or parallel of current channels.
Jumper lead, black, 12.5 cm (5”) long, use with voltage /
current outputs, 600 V, 32 Amps CAT II.
Qty. 2 ea.
Part
Number
2001-573
Qty. 4 ea.
Part
Number
2001-573
Sleeved Combination Voltage Test Leads: Keeps the test
leads from getting entangled. Three common leads connect
to the test set, which are interconnected down to one black
common to connect to the relay under test. Sleeved Three
Phase Test Leads, three red and black, 200 cm (78.7”) long,
600 V, 32 Amperes CAT II.
Qty. 1 ea.
Part
Number
2001-395
Sleeved Combination Current Test Leads: Keeps the test
leads from getting entangled. Three pairs of leads connect
to the test set, with three pairs to connect to the relay
under test. Sleeved Three Phase Test Leads, three red and
black, 200 cm (78.7”) long, 600 V, 32 Amperes CAT II.
Qty. 1 ea.
Part
Number
2001-396
Note that the sleeved combination leads only come with the three module configuration.
Table of Accessories
Accessories are supplied with the selection of the Test Leads Option,
and/or the Binary Input / Output / Battery Simulator Option, and/or
the STVI Option. With the Test Leads Option the number and type
of leads varies depending on the number of channels ordered. If
desired, Test Leads and Accessories can be ordered individually, see
description and part numbers below.
Test Leads and Accessories
All units come with a power cord (see Power Cord option), and
Ethernet communication cable, and instruction manual CD. All
other accessories varies depending on the options selected, see
Table of Accessories.