Data Sheet GPS7500 Noise & Interference Generator Count on the noise leader
GPS7500 Noise & Interference Generator The Noise Com GPS7500 Noise & Interference Generator is capable of generating up to 40 MHz bandwidth of arbitrary waveforms for the test of susceptibility of GPS receivers to jamming, pulsed, CW, noise and any interference which we could imagine. A modular approach provides for expandability with additional independently programmable generators for L1, L2 or L5 bands.
Noise Com’s GPS7500 Noise & Interference Generator was designed to support all the GPS testing requirements in an easy to use platform. Testing receiver susceptibility to interference, intentional or unintentional, has become a requirement and product differentiator in airborne, automotive, defense and mobile phone applications.
Examples of RTCA Test Cases Supported by the GPS7500 Test Case Frequency(MHz) Noise Bandwidth Power(dBm) Pulse Width Duty Cycle Broadband Interference 1575.42 100 kHz -110.5 N/A 100% 1575.42 20 MHz -97.5 N/A 100% 1525.0 CW -12.0 N/A 100% 1555.42 CW -89.5 N/A 100% 1575.41998 CW -120.5 N/A 100% 1595.42 CW -89.5 N/A 100% 1610.00 CW -30.0 N/A 100% 1618.00 CW -12.0 N/A 100% 1626.00 CW +8.0 N/A 100% Only aircraft with SATCOM GPS at Maximum 1575.
Specifications Description Specification Notes CW Operating Frequency Range 1000 MHz to 2000 MHz Internal Synthesizer Noise and Pulse Interference 1575.42 MHz (L1) and optionally Center Frequences 1227.60 MHz (L2) or 1176.45 MHz (L5) Arbitrary Signal (AM, Noise, Pulse) Tunable over +/-20MHz for each Band 0 to 40 MHz 3dB Bandwidth Frequency Stability +/- 0.
Wireless Telecom Group Inc. 25 Eastmans Rd Parsippany, NJ United States Tel: +1 973 386 9696 Fax: +1 973 386 9191 www.noisecom.com Follow us on: WTGinnovation Wireless Telecom Group blog.wtcom.com WTGinnovation © Copyright 2012 All rights reserved. N/GPS7500/112/EN Note: Specifications, terms and conditions are subject to change without prior notice.
