Manual

ManualsBrandsAtec ManualsEquipmentPhenix-6CP Series

CABLE

GENERATOR

GIS

SWITCHGEAR

INSULATION

MATERIALS

MOTOR

PORTABLE

PROTECTIVE

EQUIPMENT

RECLOSER

TRANSFORMER

15-200 kV

CIRCUIT

BREAKER

Specications are subject to change without notice.

Brochure No. 60700

Model 6CP200/100-10

Model 6CP120/60-7.5

Model 6CP30/15-3

Field and Lab AC Dielectric Test Sets

➤ A premier line of AC Dielectric Test Sets with ratings

from 15 to 200 kVAC

➤ Lightweightandruggedlyconstructedforyearsofelduse

➤ Units feature easy to read digital instrumentation

 andclean,efcientcontrols

➤ Simple set-up and operation

➤ Low partial discharge output

Suitable for dielectric testing a

wide range of electrical apparatus

TESTING APPLICATIONS

Summary of content (4 pages)

PAGE 1
Field and Lab AC Dielectric Test Sets 15-200 kV ➤ A premier line of AC Dielectric Test Sets with ratings from 15 to 200 kVAC ➤ Lightweight and ruggedly constructed for years of field use ➤ Units feature easy to read digital instrumentation and clean, efficient controls ➤ Simple set-up and operation ➤ Low partial discharge output Model 6CP120/60-7.
PAGE 2
safety & DESIGN FEATURES DESCRIPTION • 2 or 3 piece designs • Circuit breaker protection • External interlock provision • High voltage On/Off pushbuttons with indicator • Zero Start interlock • Manual control of output voltage • Adjustable overload circuit • Slow and fast-acting transient protection on all meters and relays • Digital timer with audible alarm • Digital multi range metering • Emergency Off pushbutton with key lockout • Guard mode for accurate current measurements • Output overlo
PAGE 3
SHIPPING SIZES DIMENSIONS & WEIGHTS MODEL 6CP30/15-3 6CP50/10-3 6CP100/50-7.5 6CP120/60-7.5 6CP100/50-10 6CP120/60-10 optional optional 22.5”(572mm) x 29.25”(743mm) x 50”(1270mm) Length Width Height Cart(s) 61 lbs(28 kgs) 70 lbs(32 kgs) Weight Length Width 16.5”(419mm) x 15.25”(388mm) 21.25”(540mm) x 16.75”(426mm) x 13.75”(349mm) Controls x11.
PAGE 4
PHENIX Technologies is committed to providing leadership, innovation, technology, quality, and service in all areas of our business. Our 70,000 square-foot headquarters is a modern manufacturing facility. All aspects of electrical, mechanical, and software design and production are performed in this facility and controlled by an ISO9001 certified quality program. Our engineers offer a unique blend of theoretical knowledge and practical experience.