FSH4-8_dat-sw_Titel_v0800.indd 1 Data Sheet | 08.00 Test & Measurement R&S®FSH4/R&S®FSH8 Spectrum Analyzer Specifications 08.06.
Version 08.00, June 2011 CONTENTS Specifications.................................................................................................................................................................. 3 Frequency ...............................................................................................................................................................................................3 Sweep time ....................................................................................
Version 08.00, June 2011 Specifications Specifications apply under the following conditions: 15 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to. Data without tolerances: typical values only. Data designated as “nominal” applies to design parameters and is not tested. Data without tolerance limits is not binding. Frequency ® Frequency range R&S FSH4 model .04/.14 ® R&S FSH8 model .08/.18 ® R&S FSH4 model .24 ® R&S FSH8 model .
Version 08.00, June 2011 Bandwidths Resolution bandwidths Range Bandwidth accuracy Selectivity 60 dB:3 dB Video filters Range –3 dB bandwidth 1 Hz ≤ RBW ≤ 300 kHz RBW > 300 kHz 1 Hz to 3 MHz in 1/3 sequence nominal < 5 % nominal < 10 % nominal < 5 (Gaussian type filters) –3 dB bandwidth 1 Hz to 3 MHz in 1/3 sequence Level Display range displayed noise floor to +30 dBm Maximum rated input level with RF attenuation ≥ 10 dB DC voltage model .04/.08/.14/.18 80 V model .24/.
Version 08.00, June 2011 Adjacent channel leakage power ratio (ACLR) Dynamic range frequency < 3.6 GHz, total power > –20 dBm 3GPP WCDMA adjacent channel nominal > 55 dB alternate channel nominal > 58 dB ® CDMA2000 adjacent channel nominal > 58 dB alternate channel nominal > 61 dB Immunity to interference, nominal values Image frequencies serial number < 105000 fin – 2 × 21.4 MHz < –70 dBc, typ. –80 dBc fin – 2 × 831.4 MHz < –70 dBc, typ.
Version 08.00, June 2011 Level measurement uncertainty Absolute level uncertainty at 100 MHz Frequency response (+20 °C to +30 °C) Attenuator uncertainty Uncertainty of reference level setting Display nonlinearity Bandwidth switching uncertainty Total measurement uncertainty +20 °C to +30 °C 9 kHz ≤ f < 100 kHz (models .04/.14/.08/.18 only) 100 kHz ≤ f < 10 MHz 10 MHz ≤ f ≤ 3.6 GHz 3.6 GHz < f ≤ 8 GHz < 0.3 dB nominal < 1.5 dB nominal < 1.5 dB < 1 dB < 1.5 dB < 0.3 dB nominal < 0.1 dB < 0.
Version 08.00, June 2011 Inputs and outputs RF input Impedance Connector VSWR 100 kHz ≤ f ≤ 1 GHz 1 GHz < f ≤ 6 GHz 6 GHz < f ≤ 8 GHz RF input only 50 Ω N female nominal < 1.5 nominal < 2 nominal < 3 0 dB to 40 dB in 5 dB steps Input attenuator AF output AF demodulation types AM and FM Connector 3.
Version 08.00, June 2011 Vector network analysis/vector voltmeter Model .24/.28 with R&S®FSH-K42/R&S®FSH-K45 option ® Frequency range R&S FSH4 model .24 ® R&S FSH8 model .28 Frequency resolution Data points Port power 300 kHz to 3.
Version 08.00, June 2011 Transmission measurement Result formats measurement mode = vector measurement mode = vector voltmeter Gain Measurement range Display range Resolution Measurement uncertainty Phase Range selectable calibration method = Full Two Port High Accuracy magnitude, phase, magnitude + phase, group delay, electrical length magnitude + phase –120 dB to +80 dB 1/2/5/10/20/50/100 dB, linear 100 % 0.
Version 08.00, June 2011 Scalar network analysis Model .24/.28 without R&S®FSH-K42 option ® Frequency range R&S FSH4 model .24 ® R&S FSH8 model .28 Frequency resolution Data points Port power 300 kHz to 3.6 GHz 300 kHz to 8 GHz 1 Hz 631 nominal 0 dBm to –40 dBm in 1 dB steps controlled via tracking generator attenuation Reflection measurement Result formats Return loss magnitude, VSWR, reflection coefficient 1/2/5/10/20/50/100 dB, linear 100 % 0.
Version 08.00, June 2011 Distance-to-fault analysis Model .24/.28 with R&S®FSH-K41 option Return loss VSWR Reflection coefficient mRho Fault resolution in m Maximum permissible spurious signal Input range resolution range resolution 1/2/5/10/20/50/100 dB, linear 100 % 0.01 dB 1 to 1.1, 1.5, 2, 6, 11, 21 or 71 0.01 range 1 to 1000 in 1, 2, 5 steps 8 (1.
Version 08.
Version 08.00, June 2011 R&S®FSH-K46 CDMA2000® BTS pilot channel and EVM measurement application R&S®FSH-K46E CDMA2000® BTS code domain power measurement application ® ® ® The specifications below apply to the R&S FSH4 and R&S FSH8. They are based on the data sheet specifications of the R&S FSH4 ® and R&S FSH8, have not been checked separately and are not verified during instrument calibration. Measurement uncertainties are indicated as 95 % confidence intervals.
Version 08.00, June 2011 Composite EVM Measurement range Measurement uncertainty SNR > 30 dB –40 dBm < PRF channel < 20 dBm 1.5 % < EVM ≤ 10% 10 % < EVM < 25 % Residual EVM Rho Measurement range Measurement uncertainty SNR > 30 dB –40 dBm < PRF channel < 20 dBm 0.97 < Rho ≤ 1.0 0.90 < Rho ≤ 0.97 1.5 % < EVM < 25 % typ. 2.0 % typ. 2.5 % typ. 2.5 % 0.9 < Rho < 1 typ. 0.005 typ. 0.
Version 08.00, June 2011 R&S®FSH-K50/R&S®FSH-K51 LTE FDD/TDD downlink pilot channel and EVM measurement application 2 R&S®FSH-K50E/R&S®FSH-K51E LTE FDD/TDD downlink extended channel and modulation measurement application 2 ® ® ® The specifications below apply to the R&S FSH4 and R&S FSH8. They are based on the data sheet specifications of the R&S FSH4 ® and R&S FSH8, have not been checked separately and are not verified during instrument calibration.
Version 08.00, June 2011 General data Manual operation Languages Chinese, English, French, German, Italian, Hungarian, Japanese, Korean, Portuguese, Russian, Spanish ® Remote control (R&S FSH-K40 option) Command set LAN interface USB Display Resolution Audio Speaker USB interface SCPI 1997.0 10/100BaseT, RJ-45 mini B plug, version 1.
Version 08.
Version 08.00, June 2011 Accessories R&S®FSH-Z1 and R&S®FSH-Z18 power sensors ® Frequency range R&S FSH-Z1 ® R&S FSH-Z18 10 MHz to 30 MHz 30 MHz to 2.4 GHz 2.
Version 08.00, June 2011 Max. peak envelope power Power measurement range Video bandwidth 4 kHz 200 kHz 600 kHz Measurement uncertainty same as for average power plus effect of peak hold circuit Error limits of peak hold circuit for burst signals Duty cycle ≥ 0.1 and video bandwidth 4 kHz repetition rate ≥ 100/s video bandwidth 200 kHz video bandwidth 600 kHz 20/s ≤ repetition rate < 100/s 0.001 ≤ duty cycle < 0.
Version 08.00, June 2011 R&S®FSH-Z44 directional power sensor Frequency range Power measurement range VSWR referenced to 50 Ω 200 MHz to 3 GHz 3 GHz to 4 GHz depending on temperature and matching (see diagram on page 21) 200 MHz to 1.5 GHz 1.5 GHz to 4 GHz 200 MHz to 3 GHz 3 GHz to 4 GHz Power-handling capacity Insertion loss Directivity Average power Power measurement range Measurement uncertainty Zero offset Range of typical measurement error with modulation Temperature coefficient Max.
Version 08.00, June 2011 Load matching Matching measurement range Return loss VSWR VSWR Minimum forward power Dimensions (W × H × D) 200 MHz to 3 GHz 3 GHz to 4 GHz 200 MHz to 3 GHz 3 GHz to 4 GHz specifications complied with ≥ 0.2 W 0 dB to +23 dB 0 dB to +20 dB > 1.15 > 1.22 0.03 W 120 mm × 95 mm × 39 mm (4.72 in × 3.74 in × 1.53 in) 1.5 m (59 in) 0.65 kg (1.43 lb) connecting cable Weight 6 PEAK (max. 10 ms), SWR ≤ 3 1000 800 Forward power/W Error limits/dB 4 2 0.
Version 08.00, June 2011 Ordering information Designation Type Order No. ® Spectrum Analyzer, 9 kHz to 3.6 GHz, R&S FSH4 1309.6000.04 with preamplifier ® Spectrum Analyzer, 9 kHz to 3.6 GHz, R&S FSH4 1309.6000.14 with preamplifier and tracking generator ® Spectrum Analyzer, 100 kHz to 3.6 GHz, with preamplifier, R&S FSH4 1309.6000.24 tracking generator and internal VSWR bridge ® Spectrum Analyzer, 9 kHz to 8 GHz, R&S FSH8 1309.6000.08 with preamplifier ® Spectrum Analyzer, 9 kHz to 8 GHz, R&S FSH8 1309.
Version 08.
Version 08.
Version 08.
Version 08.
Version 08.
Service you can rely on J J J J J Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability About Rohde & Schwarz Rohde & Schwarz is an independent group of companies specializing in electronics. It is a leading supplier of solutions in the fields of test and measurement, broadcasting, radiomonitoring and radiolocation, as well as secure communications.
