Instruction Manual

ManualsBrandsAtec ManualsEquipmentRohde-Schwarz-FSH-Z1

Version 08.00, June 2011

Rohde & Schwarz R&S

FSH4/FSH8 Spectrum Analyzer 15

R&S

FSH-K50/R&S

FSH-K51 LTE FDD/TDD downlink pilot channel and EVM

measurement application

R&S

FSH-K50E/R&S

FSH-K51E LTE FDD/TDD downlink extended channel

and modulation measurement application

The specifications below apply to the R&S

FSH4 and R&S

FSH8. They are based on the data sheet specifications of the R&S

FSH4

and R&S

FSH8, have not been checked separately and are not verified during instrument calibration. Measurement uncertainties are

indicated as 95 % confidence intervals. The specified level measurement errors do not take into account systematic errors due to

reduced signal-to-noise ratio (S/N).

Measurements R&S

FSH-K50/R&S

FSH-K51 R&S

FSH-K50E/R&S

FSH-K51E

Spectrum overview ● ●

Result summary ● ●

RF channel power ● ●

Carrier frequency error ● ●

I/Q offset ● ●

Cell identity ● ●

Cyclic prefix ● ●

Reference signal power ● ●

PSYNC power ● ●

SSYNC power ● ●

PBCH power ● ●

PCFICH power ● ●

PDSCH power ● ●

Reference signal EVM ● ●

PSYNC EVM ● ●

SSYNC EVM ● ●

PBCH EVM ● ●

PCFICH EVM ● ●

PDSCH EVM ● ●

Constellation diagram – ●

PSYNC – ●

SSYNC – ●

QPSK – ●

16QAM – ●

64QAM – ●

BTS scanner – ●

Cell identity – ●

PSYNC power – ●

SSYNC power – ●

All specifications are valid for SNR > 30 dB, +15 °C to +35 °C.

R&S

FSH-K50/R&S

FSH-K51/R&S

FSH-K50E/R&S

FSH-K51E options require instruments with serial number ≥ 105000.

Frequency range 15 MHz to 3.0 GHz

Supported channel bandwidths 1.4/3/5/10/15/20 MHz

Carrier frequency uncertainty

Lock range ±10 kHz

Measurement uncertainty SNR > 30 dB,

Δf

ref

= uncertainty of reference frequency

< 10 Hz + Δf

ref

RF channel power

frequency > 15 MHz

preamplifier = OFF –60 dBm < P

RF channel

< 20 dBm

Measurement range

preamplifier = ON –75 dBm < P

RF channel

< 20 dBm

Measurement uncertainty –75 dBm < P

RF channel

< 20 dBm,

ref. level adjusted to RF channel power

< 1 dB, typ. 0.5 dB

EVM

Measurement range –50 dBm < P

RF channel

< 10 dBm, 860 MHz < frequency < 2.69 GHz,

E-UTRA test model 3.1, bandwidth 10 MHz, reference signal and PDSCH

Residual EVM < 2.5 %, typ. 2.0 %