Variable Transformers Series 5000 l 28.0 to 252.
5000 Series The 5011/5021 Series Variable transformers are designed to control large KVA requirements. The 5011 operates on 120 volts and is rated for constant current of 50 amperes. The 5021 operates on 240 volts and constant current of 28 amperes. The 5011 Series units have coil tapping arrangements allowing output voltage from 0-117% of line voltage, while the 5021 Series allows output voltage from 0 to line voltage or 17% above line voltage.
5000 Series VIEW FROM ROTOR END For opposite rotation interchange external connections from 5 to 1, 2 to 4 and 6 to 7. 5011 5021 Single Unit PART NUMBER MANUALLY OPERATED MOTOR DRIVEN 5021-3P 5021E-3P M5021-3P M5021E-3P 5021-3Y 5021E-3Y M5021-3Y M5021E-3Y INPUT WIRING 20.2 23.5 10.2‡ 0-480 0-560 0-560 84 84 84*-36 V. D. 28 28 28*-12 V. D.
5000 Series PART NUMBER INPUT OUTPUT MAX AMPS MAX KVA SHAFT ROTATION FOR VOLTAGE INCREASE 34.9 40.7 17.6‡ WIRING MANUALLY OPERATED MOTOR DRIVEN VOLTS 5021-6D 5021E-6D M5021-6D M5021E-6D Three Phase Open Delta 5021-6P 5021E-6P M5021-6P M5021E-6P Single Phase Parallel 5021-6PS M5021-6PS 5021E-6PS M5021E-6PS 5021-6Y 5021E-6Y HERTZ VOLTS NET WEIGHT IN LBS. (MAX) SCHEMATIC (Pg 8 & 9) MANUAL MOTOR DRIVEN INPUT OUTPUT CW CW CW 4-1-4 2-1-2 5-1-5 D-1-D D-1-D D-1-D 22 & 5 481 502 40.3 47.
000 Series PART NUMBER INPUT OUTPUT MAX AMPS MAX KVA SHAFT ROTATION FOR VOLTAGE INCREASE 140 140 140*-60 V. D. 67.2 78.4 33.
5000 Series PART NUMBER INPUT OUTPUT MAX AMPS MAX KVA SHAFT ROTATION FOR VOLTAGE INCREASE WIRING MANUALLY OPERATED MOTOR DRIVEN VOLTS — M5011-15Y M5011E-15Y Three Phase Wye — M5021-15Y M5021E-15Y Three Phase Wye — M5011-18Y M5011E-18Y Three Phase Wye — M5021-18Y M5021E-18Y Three Phase Wye — M5011-21Y M5011E-21Y Three Phase Wye — M5021-21Y M5021E-21Y Three Phase Wye — M5011-24Y M5011E-24Y Three Phase Wye — M5021-24Y M5021E-24Y Three Phase Wye — M5011-27Y M5011E-27Y Three Pha
5000/6000 Series Manual Single, Uncased Two Ganged 17.06” [433.3] 13.56” [344.4] 15.12” [384.2] A B C Three Ganged 23.12” [587.4] 19.62” [498.3] 21.19” [538.2] Manual Two and Three-Ganged, Uncased Manual Single, Cased Manual Two-Ganged, Cased A B Single Unit 12.94” [328.6] 15.50” [393.7] Two Ganged 19.18” [487.3] 21.56” [547.6] Motor Driven, Single and Two-Ganged, Cased Single Unit Two Ganged A 13.25” [336.6] 19.32” [490.7] B 9.75” [247.7] 15.82” [401.8] C (5 sec.) 13.53” [343.7] 19.62” [498.
5000/6000 Series A 3 Ganged 35.8” [909.32] 4, 5, 6 Ganged 54.8” [1391.9] 7, 8, 9 Ganged 72.8” [1849.1] Manual Three to Nine-Ganged, Cased 4 Ganged A B 30.38” [771.5] 27.38” [695.3] 5 Ganged 36.44” [925.5] 33.44” [849.3] 6 Ganged 42.50” [1079.5] 39.50” [1003.3] 7 Ganged 48.56” [1233.5] 45.56” [1157.3] 8 Ganged 54.62” [1387.5] 51.62” [1311.3] 9 Ganged 60.69” [1541.5] 57.69” [1465.3] Manual Four to Nine-Ganged, Uncased A 3 Ganged 33.5” [850.9] 4, 5, 6 Ganged 52.5” [1333.
5000/6000 Series A B 12 Ganged 15 Ganged 18 Ganged 21 Ganged 24 Ganged 27 Ganged 36.31” [922.3] 42.38” [1076.4] 48.44” [1230.3] 54.50” [1384.3] 60.56” [1538.3] 66.62” [1692.3] 30.94” [786.8] 37.00” [939.8] 43.06” [1093.8] 49.12” [1247.8] 55.19” [1401.8] 61.25” [1555.8] Motor-Driven 12, 15, 18, 21, 24 & 27-Ganged, Uncased A 12, 15, 18 Ganged 52.5” [1333.5] 21, 24, 27 Ganged 70.5” [1790.7] Motor-Driven 12, 15, 18, 21, 24 & 27-Ganged, Cased A B 10 Ganged 12 Ganged 14 Ganged 42.38” [1076.3] 48.
